|
|
|
1 - 10 of
2,115 results for
Zoning Two MDS Switches After Connecting with an ISL or EISL Link
|
|
|
|
This document examines situations that can arise when allowing two Cisco MDS switches to merge zone information after each already has zoning information, and an Extended ISL (EISL) link is configured between them.
www.cisco.com/en/US/products/hw/ps4159/ps4358/products_tech_note09186a00802205ff.shtml
18 Jan 2006
Some links below may open...selected. Cisco MDS 9000 Family Cookbook for MDS SAN-OS Release...and SPAN for MDS Switches Configuration...Serial Numbers from an MDS 28/Oct...Configuration with FCIP 29/Nov...Mar/2006 Zoning Two MDS Switches After Connecting with an ISL or EISL Link 18/Jan...
www.cisco.com/en/US/products/hw/ps4159/ps4358/prod_configuration_examples_list.html
25 Apr 2005
Some links below may...CiscoWorks and MDS Fabric Manager...2007 Zoning Two MDS Switches After Connecting with an ISL or EISL Link 18...
www.cisco.com/en/US/products/hw/ps4159/ps4358/prod_tech_notes_list.html
25 Apr 2005
This document provides a sample configuration for basic Fibre Channel Over TCP/IP (FCIP) Multilayer Director Switch (MDS) to MDS.
www.cisco.com/en/US/tech/tk1048/technologies_configuration_example09186a00801e6f03.shtml
29 Nov 2005
...inconsistent between two switches connected by the interface...Action Compare full zoning database with the adjacent switch, correct the difference...Introduced Cisco MDS SAN-OS Release...isolated because of an unknown format...VSAN. When two switches in a...bringing up the link. If after verifying the...
www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_2_x/troubleshooting/guide/ts_zones.html
01 Jul 2007
...inconsistent between two switches connected by the interface...Action Compare full zoning database with the adjacent switch, correct the difference...Introduced Cisco MDS SAN-OS Release...isolated because of an unknown format...VSAN. When two switches in a...bringing up the link. If after verifying the...
www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_zones.html
31 Mar 2008
...both ends of the ISL. Note To issue commands with the internal keyword, you must have an account that is...network-admin group. switch# show port internal...8-28 Cisco MDS 9000 Family Troubleshooting...failure or not-connected) phy port enable...PI_FSM_ST_LINK_INIT] port...node id 0x202 cnt_link_failure(0...Remains Isolated After a Zone Merge Symptom E...zone sets on the two switches differ...
www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pdf
6169KB
...connected to another switch may also be configured...you must configure an E port on a 32-port...This port may be connected to a peripheral...o m 13-5 Cisco MDS 9000 Family CLI...only communicate with devices on the same...attached to TL ports in zones that have up to...create an extended ISL (EISL) between two switches. TE ports...are transmitted in EISL frame format, which...the same physical link. This feature is...
www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_3/cli.pdf
10825KB
...not aware of a switch fabric because they only communicate with devices on the same...to TL ports in zones that have up to...on Generation 2 switching module interfaces...TE port) mode, an interface functions...port. It may be connected to another TE port...create an extended ISL (EISL) between two switches. TE ports...specific to Cisco MDS 9000 Family switches...transmitted in EISL frame format...the same physical link. This feature...
www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/cli.pdf
11957KB
...not aware of a switch fabric because they only communicate with devices on the...to TL ports in zones that have up to...on Generation 2 switching module interfaces...TE port) mode, an interface functions...port. It may be connected to another TE port...create an extended ISL (EISL) between two switches. TE ports...specific to Cisco MDS 9000 Family switches...transmitted in EISL frame format...the same physical link. This feature...
References:
6
TAC
www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/intf.html
17 May 2010
|
|
|
|
