Advisory ID: cisco-sa-20010413-cat5k-8021x
For Public Release 2001 April 13 14:00 UTC (GMT)
Vulnerability Scoring Details
Software Versions and Fixes
Obtaining Fixed Software
Exploitation and Public Announcements
Status of This Notice: Final
Cisco Security Procedures
When an 802.1x frame is received by an affected Catalyst 5000 series switch on a STP blocked port it is forwarded in that VLAN instead of being dropped. This causes a performance impacting 802.1x frames network storm in that part of the network, which is made up of the affected Catalyst 5000 series switches. This network storm only subsides when the source of the 802.1x frames is removed or one of the workarounds in the workaround section is applied. This vulnerability can be exploited to produce a denial of service (DoS) attack.
This vulnerability is documented as Cisco bug id CSCdt62732.
This notice will be posted at http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20010413-cat5k-8021x.
This section provides details on affected products.
Cisco Catalyst 5000 series switches based on any of the following EARL (Encoded Address Recognition Logic) hardware revisions:
and running any of the following switch software revisions:
4.5 (11) or earlier
5.5 (6) or earlier
6.1 (2) or earlier
are affected by this vulnerability. This series includes the Catalyst models 5000, 5002, 5500, 5505, 5509, 2901, 2902 and 2926 switches.
To determine your hardware and software revision type sh mod on the console prompt of the switch.
Additional information can be found in the document, "Identifying Catalyst 5000 EARL Version and Other Common EARL Questions."
Catalyst 5000 series switches based on EARL 2 or later hardware revisions are not affected by this vulnerability.
Catalyst 5000 series switches regardless of the EARL hardware revision, running the following switch software revisions
4.5 (12) or later - expected general availability before 2001, May
5.5 (7) or later
6.1 (3) or later
are not affected by this vulnerability.
No other Cisco product is currently known to be affected by this vulnerability. This includes the Catalyst 6000, 4000, 3500XL, 2900XL and 2948G switches.
When an 802.1x (IEEE standard for port based network access control) frame is received by an affected Catalyst 5000 series switch on a STP (Spanning Tree Protocol) blocked port it is forwarded in that VLAN (Virtual Local Area Network) instead of being dropped. This causes a performance impacting 802.1x frames network storm in that part of the network, which is made up of the affected Catalyst 5000 series switches. This network storm only subsides when the source of the 802.1x frames is removed or one of the workarounds in the workaround section is applied.
This vulnerability is documented as Cisco bug id CSCdt62732, which requires a CCO account to view.
CVSS is a standards-based scoring method that conveys vulnerability severity and helps determine urgency and priority of response.
Cisco has provided a base and temporal score. Customers can then compute environmental scores to assist in determining the impact of the vulnerability in individual networks.
Cisco has provided an FAQ to answer additional questions regarding CVSS at
Cisco has also provided a CVSS calculator to help compute the environmental impact for individual networks at
When an affected Catalyst 5000 series switch network receives an 802.1x frame it causes an 802.1x frames network storm. This network storm degrades the performance of the network. Slower ports on the affected Catalyst 5000 series switches may stop passing user data. The affected Catalyst 5000 series switches may not respond to any management inquiries via SNMP, Telnet or HTTP. However, management via the console port on the switches is still possible and can be used to apply the workarounds.
This vulnerability has been fixed in the following switch software revisions
4.5 (12) or later - expected availability before 2001, May
5.5 (7) or later
6.1 (3) or later
and the fix will be carried forward in all future releases.
Software upgrade can be performed via the console interface.
The following workarounds will prevent the 802.1x frames from causing an 802.1x frames network storm in an affected Catalyst 5000 series switch network.
These workarounds can also be applied to a network experiencing an 802.1x frames network storm.
Configure permanent MAC address entries for the entire reserved STP
range 01-80-c2-00-00-02 to 01-80-c2-00-00-0f to be directed out an unused port
for each VLAN on each affected switch in the network.
The commands to configure are given below.
set cam permanent 01-80-c2-00-00-02 <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-03 <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-04 <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-05 <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-06 <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-07 <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-08 <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-09 <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-0a <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-0b <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-0c <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-0d <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-0e <mod#>/<port#> <VLAN> set cam permanent 01-80-c2-00-00-0f <mod#>/<port#> <VLAN>
Break the STP loop by either
Disabling the redundant (STP blocked ports) or
Disconnecting the cable from these
- Disabling the redundant (STP blocked ports) or
Power down the Catalyst 5000 switch(es) that create the spanning-tree
loop (any switch with STP blocked ports).
Remove all the sources of 802.1x frames before powering up the switches.
Cisco has made free software available to address this vulnerability for affected customers. Prior to deploying software, customers should consult their maintenance provider or check the software for feature set compatibility and known issues specific to their environment.
Customers may only install and expect support for the feature sets they have purchased. By installing, downloading, accessing or otherwise using such software upgrades, customers agree to be bound by the terms of Cisco's software license terms found at http://www.cisco.com/public/sw-license-agreement.html, or as otherwise set forth at Cisco.com Downloads at http://www.cisco.com/public/sw-center/sw-usingswc.shtml.
Do not contact either "email@example.com" or "firstname.lastname@example.org" for software upgrades.
Customers with contracts should obtain upgraded software through their regular update channels. For most customers, this means that upgrades should be obtained through the Software Center on Cisco's worldwide website at http://www.cisco.com.
Customers whose Cisco products are provided or maintained through prior or existing agreement with third-party support organizations such as Cisco Partners, authorized resellers, or service providers should contact that support organization for guidance and assistance with the appropriate course of action in regards to this advisory.
The effectiveness of any workaround or fix is dependent on specific customer situations such as product mix, network topology, traffic behavior, and organizational mission. Due to the variety of affected products and releases, customers should consult with their service provider or support organization to ensure any applied workaround or fix is the most appropriate for use in the intended network before it is deployed.
Customers who purchase direct from Cisco but who do not hold a Cisco service contract and customers who purchase through third-party vendors but are unsuccessful at obtaining fixed software through their point of sale should get their upgrades by contacting the Cisco Technical Assistance Center (TAC). TAC contacts are as follows.
+1 800 553 2447 (toll free from within North America)
+1 408 526 7209 (toll call from anywhere in the world)
Have your product serial number available and give the URL of this notice as evidence of your entitlement to a free upgrade. Free upgrades for non-contract customers must be requested through the TAC.
Refer to http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml for additional TAC contact information, including special localized telephone numbers and instructions and e-mail addresses for use in various languages.
The Cisco PSIRT is not aware of any malicious use of the vulnerability described in this advisory.
A customer who discovered this vulnerability while using Microsoft Windows XP BETA software reported this vulnerability to Cisco. Microsoft Windows XP attempts 802.1x authentication during its boot-up phase. Following these configuration steps can disable this:
Click on the associated Local Area Connection under Network
Click on the Authentication Tab at the top right.
Uncheck "Network Access Control using IEEE
This issue has been discussed in news articles regarding issues with Microsoft Windows XP BETA program and the Cisco Catalyst 5000 series switches.
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A stand-alone copy or Paraphrase of the text of this document that omits the distribution URL in the following section is an uncontrolled copy, and may lack important information or contain factual errors.
This advisory will be posted on Cisco's worldwide website at http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20010413-cat5k-8021x.
In addition to worldwide web posting, a text version of this notice is clear-signed with the Cisco PSIRT PGP key and is posted to the following e-mail and Usenet news recipients.
email@example.com (includes CERT/CC)
Various internal Cisco mailing lists
Future updates of this advisory, if any, will be placed on Cisco's worldwide website, but may or may not be actively announced on mailing lists or newsgroups. Users concerned about this problem are encouraged to check the above URL for any updates.
Initial public release.
Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on Cisco's worldwide website at http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html. This includes instructions for press inquiries regarding Cisco security notices. All Cisco security advisories are available at http://www.cisco.com/go/psirt.