Products & Services
Support

Product Categories


Popular Downloads


Manage Software

How to Buy

For Home

Linksys Products Store
Linksys is now part of Belkin
Products for everyone

All Ordering Options

Training & Events Partners
Guest

Cisco Applied Mitigation Bulletin

Cisco Applied Mitigation Bulletin: Microsoft Security Bulletin Release for December 2013

 
Threat Type:IntelliShield: Applied Mitigation Bulletin
IntelliShield ID:31928
Version:2
First Published:2013 December 10 19:33 GMT
Last Published:2014 January 02 17:55 GMT
Port: Not available
CVE:CVE-2013-3878 , CVE-2013-3899 , CVE-2013-3900 , CVE-2013-3902 , CVE-2013-3903 , CVE-2013-3907 , CVE-2013-5042 , CVE-2013-5045 , CVE-2013-5046 , CVE-2013-5047 , CVE-2013-5048 , CVE-2013-5049 , CVE-2013-5051 , CVE-2013-5052 , CVE-2013-5054 , CVE-2013-5056 , CVE-2013-5057 , CVE-2013-5058 , CVE-2013-5059 , CVE-2013-5072
BugTraq ID:64091
Urgency:Unlikely Use
Credibility:Confirmed
Severity:Moderate Damage
Related Resources:
 
 
Version Summary:Corrected list of Microsoft Security Bulletins.
 

Cisco Response

Microsoft announced 11 security bulletins that address 24 vulnerabilities as part of the monthly security bulletin release on December 10, 2013. A summary of these bulletins is on the Microsoft website at http://technet.microsoft.com/en-us/security/bulletin/ms13-dec. This document provides identification and mitigation techniques that administrators can deploy on Cisco network devices.

The vulnerabilities that have a client software attack vector, can be exploited locally on the vulnerable device, require user interaction, can be exploited using web-based attacks (these include but are not limited to cross-site scripting, phishing, and web-based email threats), or can be exploited using email attachments and files stored on network shares are in the following list:

The vulnerability that has a network mitigation is in the following list. Cisco devices provide several countermeasures for the vulnerability that has a network attack vector, which will be discussed in detail later in this document.

Information about affected and unaffected products is available in the respective Microsoft advisories and the Cisco IntelliShield alerts that are referenced in Cisco Event Response: Microsoft Security Bulletin Release for December 2013.

In addition, multiple Cisco products use Microsoft operating systems as their base operating system. Cisco products that may be affected by the vulnerabilities described in the referenced Microsoft advisories are detailed in the "Associated Products" table in the "Product Sets" section.

Vulnerability Characteristics

MS13-096 Vulnerability in Microsoft Graphics Component Could Allow Remote Code Execution: This vulnerability has been assigned Common Vulnerabilities and Exposures (CVE) identifier CVE-2013-3906. This vulnerability can be exploited remotely without authentication and requires user interaction. Successful exploitation of this vulnerability may allow arbitrary code execution. The attack vector for exploitation of this vulnerability is through Web-based Distributed Authoring and Versioning (WebDAV) over HTTP packets that typically use TCP port 80 but may also use TCP ports 3128, 8000, 8010, 8080, 8888, and 24326.

Mitigation Technique Overview

The vulnerabilities that have a client software attack vector, can be exploited locally on the vulnerable device, require user interaction, can be exploited using web-based attacks (these include but are not limited to cross-site scripting, phishing, and web-based email threats), or can be exploited using email attachments and files stored on network shares are in the following list:

These vulnerabilities are mitigated most successfully at the endpoint through software updates, user education, desktop administration best practices, and endpoint protection software such as Host Intrusion Prevention Systems (HIPS) or antivirus products.

The vulnerability that has a network mitigation is in the following list. Cisco devices provide several countermeasures for this vulnerability. This section of the document provides an overview of these techniques.

Effective means of exploit prevention can be provided by Cisco ASA 5500 Series Adaptive Security Appliance, Cisco Catalyst 6500 Series ASA Services Module (ASASM), and the Firewall Services Module (FWSM) for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers using application layer protocol inspection.

This protection mechanism filters and drops packets that are attempting to exploit this vulnerability.

Effective exploit prevention can also be provided by the Cisco ACE Application Control Engine Appliance and Module using application protocol inspection.

Effective use of Cisco Intrusion Prevention System (IPS) event actions provides visibility into and protection against attacks that attempt to exploit this vulnerability.

Effective use of Sourcefire Intrusion Prevention System event actions provides visibility into attacks that attempt to exploit these vulnerabilities.

Risk Management

Organizations are advised to follow their standard risk evaluation and mitigation processes to determine the potential impact of these vulnerabilities. Triage refers to sorting projects and prioritizing efforts that are most likely to be successful. Cisco has provided documents that can help organizations develop a risk-based triage capability for their information security teams. Risk Triage for Security Vulnerability Announcements and Risk Triage and Prototyping can help organizations develop repeatable security evaluation and response processes.

Device-Specific Mitigation and Identification

Caution: The effectiveness of any mitigation technique depends on specific customer situations such as product mix, network topology, traffic behavior, and organizational mission. As with any configuration change, evaluate the impact of this configuration prior to applying the change.

Specific information about mitigation and identification is available for these devices:

Cisco ASA, Cisco ASASM, and Cisco FWSM Firewalls

Mitigation: Application Layer Protocol Inspection

Application layer protocol inspection is available beginning in software release 7.2(1) for the Cisco ASA 5500 Series Adaptive Security Appliance, software release 8.5 for the Cisco Catalyst 6500 Series ASA Services Module, and in software release 4.0(1) for the Cisco Firewall Services Module. This advanced security feature performs deep packet inspection of traffic that transits the firewall. Administrators may construct an inspection policy for applications that require special handling through the configuration of inspection class maps and inspection policy maps, which are applied via a global or interface service policy. Application inspection will inspect both IPv4 and IPv6 packets matched in the class map of the policy.

Additional information about application layer protocol inspection is in the Configuring Application Inspection section of Book 2: Cisco ASA Series Firewall CLI Configuration Guide, 9.1.

Caution: Application layer protocol inspection will decrease firewall performance. Administrators are advised to test performance impact in a lab environment before this feature is deployed in production environments.

HTTP Application Inspection
For MS13-096, by using the HTTP inspection engine on the Cisco ASA 5500 Series Adaptive Security Appliances, Cisco 6500 Series ASA Services Modules, and the Cisco Firewall Services Module, administrators can configure regular expressions (regexes) for pattern matching and construct inspection class maps and inspection policy maps. These methods can help protect against specific vulnerabilities, such as the one described in this document, and other threats that may be associated with HTTP traffic. The following HTTP application inspection configuration uses the Cisco Modular Policy Framework (MPF) to create a policy for inspection of traffic on TCP ports 80, 3128, 8000, 8010, 8080, 8888, and 24326, which are the default ports for the Cisco IPS #WEBPORTS variable. The HTTP application inspection policy will drop connections where the HTTP response body contains any of the regexes that are configured to match the ActiveX control that is associated with this vulnerability.

Caution: The configured regexes can match text strings at any location in the body of an HTML response. Care should be taken to ensure that legitimate business applications that use matching text strings without calling the ActiveX control are not affected. Additional information about regex syntax is in Creating a Regular Expression.

Additional information about ActiveX exploits and mitigations that leverage Cisco firewall technologies is available in the Preventing ActiveX Exploits with Cisco Firewall Application Layer Protocol Inspection Cisco Security Intelligence Operations white paper.

!
!-- Configure regex that looks for the .tiff file extension for
!-- the vulnerability associated with MS13-096 
!
regex MS13-096 ".+\x2e[T|t][I|i][F|f][F|f]"
!-- The "?" in the above regexes must be escaped with  
!-- [CTRL-v]. See Creating a Regular Expression for   
!-- details 
! 
!-- Configure a regex class to match on the regular  
!-- expressions that are configured above
! 
class-map type regex match-any MS13-096_regex_class
 match regex MS13-096
!
!-- Configure an object group for the default ports that 
!-- are used by the Cisco IPS #WEBPORTS variable, which 
!-- are TCP ports 80 (www), 3128, 8000, 8010, 8080, 8888, 
!-- and 24326
!
object-group service WEBPORTS tcp
 port-object eq www 
 port-object eq 3128 
 port-object eq 8000 
 port-object eq 8010 
 port-object eq 8080 
 port-object eq 8888 
 port-object eq 24326 
!
!-- Configure an access list that uses the WEBPORTS object 
!-- group, which will be used to match TCP packets that 
!-- are destined to the #WEBPORTS variable that is used 
!-- by a Cisco IPS device
!
access-list Webports_ACL extended permit tcp any any object-group WEBPORTS 
!
!-- Configure a class that uses the above-configured
!-- access list to match TCP packets that are destined
!-- to the ports that are used by the Cisco IPS #WEBPORTS
!-- variable
!
class-map Webports_Class
 match access-list Webports_ACL
!
!-- Configure an HTTP application inspection policy that  
!-- identifies, drops, and logs connections that contain   
!-- the regexes that are configured above
! 
policy-map type inspect http MS_Nov_2013_policy
 parameters
!
!-- "body-match-maximum" indicates the maximum number of 
!-- characters in the body of an HTTP message that
!-- should be searched in a body match. The default value is
!-- 200 bytes. A large number such as shown here may have an
!-- impact on system performance.  Administrators are advised
!-- to test performance impact in a lab environment before 
!-- this command is deployed in production environments
!
 body-match-maximum 1380
 match response body regex class MS-Nov-2013_regex_class
  drop-connection log 
!
!-- Add the above-configured "Webports_Class" that matches 
!-- TCP packets that are destined to the default ports  
!-- that are used by the Cisco IPS #WEBPORTS variable to  
!-- the default policy "global_policy" and use it to 
!-- inspect HTTP traffic that transits the firewall
! 
policy-map global_policy
 class Webports_Class
  inspect http MS_Nov_2013_policy 
!
!-- By default, the policy "global_policy" is applied 
!-- globally, which results in the inspection of 
!-- traffic that enters the firewall from all interfaces 
!
service-policy global_policy global

For additional information about the configuration and use of object groups, reference the Configuring Objects and ACLs section of Book 1: Cisco ASA Series General Operations CLI Configuration Guide, 9.1.

Additional information about HTTP application inspection and the MPF is in the Configuring Application Inspection section of Book 2: Cisco ASA Series Firewall CLI Configuration Guide, 9.1.

For information about using the Cisco firewall command-line interface to gauge the effectiveness of application inspection, see the Cisco Security Intelligence Operations white paper Identification of Security Exploits with Cisco ASA, Cisco ASASM, and Cisco FWSM Firewalls.

Cisco ACE

Mitigation: Application Protocol Inspection

Application protocol inspection is available for the Cisco ACE Application Control Engine Appliance and Module. This advanced security feature performs deep packet inspection of traffic that transits the Cisco ACE device. Administrators can construct an inspection policy for applications that require special handling through the configuration of inspection class maps and inspection policy maps, which are applied via a global or interface service policy.

Additional information about application protocol inspection is in the Configuring Application Protocol Inspection section of the Security Guide vA5(1.0), Cisco ACE Application Control Engine.

HTTP Deep Packet Inspection

To conduct HTTP deep packet inspection for MS13-096, administrators can configure regular expressions (regexes) for pattern matching and construct inspection class maps and inspection policy maps. These methods can help protect against specific vulnerabilities, such as the one described in this document, and other threats that may be associated with HTTP traffic. The following HTTP application protocol inspection configuration inspects traffic on TCP ports 80, 3128, 8000, 8010, 8080, 8888, and 24326, which are the default ports for the Cisco IPS #WEBPORTS variable. The HTTP application protocol inspection policy will drop connections where the HTTP content contains any of the regexes that are configured to match the ActiveX control that is associated with this vulnerability.

Caution: The configured regexes can match text strings at any location in the content of an HTML packet. Care should be taken to ensure that legitimate business applications that use matching text strings are not affected.

!
!-- Configure regexes that look for the .tiff file extension for
!-- the vulnerability associated with MS13-096 
!
! 
class-map type http inspect match-any MS13-096_class
  match content ".*+\x2e[T|t][I|i][F|f][F|f].*"                    
!
!-- Configure an HTTP application inspection policy that
!-- identifies, resets, and logs connections that contain
!-- the regexes that are configured above
!
policy-map type inspect http all-match MS_Dec_2013
  class MS13-096_class
    reset log
!
!-- Configure an access list that matches TCP packets
!-- that are destined to the #WEBPORTS variable that is
!-- used by a Cisco IPS device
!
access-list WEBPORTS line 8 extended permit tcp any any eq www 
access-list WEBPORTS line 16 extended permit tcp any any eq 3128 
access-list WEBPORTS line 24 extended permit tcp any any eq 8000 
access-list WEBPORTS line 32 extended permit tcp any any eq 8010 
access-list WEBPORTS line 40 extended permit tcp any any eq 8080 
access-list WEBPORTS line 48 extended permit tcp any any eq 8888 
access-list WEBPORTS line 56 extended permit tcp any any eq 24326 
!
!-- Configure a Layer 4 class that uses the above-configured
!-- access list to match TCP packets that are destined
!-- to the ports that are used by the Cisco IPS #WEBPORTS
!-- variable
!
class-map match-all L4_http_class
  match access-list WEBPORTS
!
!-- Configure a Layer 4 policy that applies the HTTP application
!-- inspection policy configured above to TCP packets that
!-- are destined to the ports that are used by the Cisco IPS
!-- #WEBPORTS variable
!
policy-map multi-match L4_MS_Dec_2013
  class L4_http_class
    inspect http policy MS_Dec_2013  
!
!-- Apply the configuration globally across all interfaces,
!-- which results in the inspection of all traffic that enters
!-- the ACE
!
service-policy input L4_MS_Dec_2013

For information about how to use the Cisco ACE command-line interface to gauge the effectiveness of application inspection, see the Cisco Security Intelligence Operations white paper Identification of Malicious Traffic Using Cisco ACE.

Cisco Intrusion Prevention System

Mitigation: Cisco IPS Signature Event Actions

Administrators can use the Cisco IPS appliances and services modules to provide threat detection and help prevent attempts to exploit several of the vulnerabilities described in this document. The following table provides an overview of CVE identifiers and the respective Cisco IPS signatures that will trigger events on potential attempts to exploit these vulnerabilities.

CVE ID Signature Release Signature ID Signature Name Enabled Severity Fidelity*
CVE-2013-5048 S759 3397-0 Microsoft Internet Explorer Uninitialized Variable Vulnerability Yes High 85
CVE-2013-5049 S759 3398-0 Microsoft Internet Explorer Use After Free Vulnerability Yes High 90
CVE-2013-5051 S759 3413-0 Microsoft Internet Explorer Remote Memory Corruption Yes High 85
CVE-2013-5052 S759 3422-0 Microsoft Internet Explorer Memory Corruption Yes High 85
CVE-2013-5056 S759 3399-0 Microsoft Internet Explorer Heap Corruption Yes High 85
CVE-2013-3900 S759 3423-0 Microsoft WinVerifyTrust Signature Validation Remote Code Execution Yes High 70
CVE-2013-3906 S752 3096-0 Microsoft Graphics Component Memory Corruption Yes High 85
CVE-2013-3906 S752 3096-1 Microsoft Graphics Component Memory Corruption Yes High 85
CVE-2013-3906 S752 3096-2 Microsoft Graphics Component Memory Corruption Yes High 85
CVE-2013-3906 S752 3096-3 Microsoft Graphics Component Memory Corruption Yes High 85
CVE-2013-3906 S752 3096-4 Microsoft Graphics Component Memory Corruption Yes High 85
CVE-2013-3906 S752 3096-5 Microsoft Graphics Component Memory Corruption Yes High 85

* Fidelity is also referred to as Signature Fidelity Rating (SFR) and is the relative measure of the accuracy of the signature (predefined). The value ranges from 0 through 100 and is set by Cisco Systems, Inc.

Administrators can configure Cisco IPS sensors to perform an event action when an attack is detected. The configured event action performs preventive or deterrent controls to help protect against an attack that is attempting to exploit the vulnerabilities listed in the preceding table.

Cisco IPS sensors are most effective when deployed in inline protection mode combined with the use of an event action. Automatic Threat Prevention for Cisco IPS 7.x and 6.x sensors that are deployed in inline protection mode provides threat prevention against an attack that is attempting to exploit the vulnerability that is described in this document. Threat prevention is achieved through a default override that performs an event action for triggered signatures with a riskRatingValue greater than 90.

For additional information about the risk rating and threat rating calculation, reference Risk Rating and Threat Rating: Simplify IPS Policy Management.

For information on using Cisco Security Manager to view the activity from a Cisco IPS sensor, please refer to the Cisco Security Intelligence Operations white paper Identification of Malicious Traffic Using Cisco Security Manager.

Sourcefire Intrusion Prevention System

The following Sourcefire Snort signatures are available for the Microsoft December 2013 Security Update.

Microsoft Advisory Applicable Rules
MS13-096 1:28464
MS13-096 1:28465
MS13-096 1:28466
MS13-096 1:28467
MS13-096 1:28468
MS13-096 1:28469
MS13-096 1:28470
MS13-096 1:28471
MS13-096 1:28472
MS13-096 1:28473
MS13-096 1:28525
MS13-096 1:28526
MS13-097 1:28862
MS13-097 1:28863
MS13-097 1:28865
MS13-097 1:28866
MS13-097 1:28873
MS13-097 1:28874
MS13-097 1:28875
MS13-097 1:28876
MS13-097 1:28877
MS13-097 1:28878
MS13-097 1:28880
MS13-099 1:28881
MS13-099 1:28882

Additional Information

THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.

Cisco Security Procedures

Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on Cisco's worldwide website at http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html. This includes instructions for press inquiries regarding Cisco security notices. All Cisco security advisories are available at http://www.cisco.com/go/psirt.

Related Information

 
Alert History
 
Version 1, December 10, 2013, 2:33 PM: Cisco Applied Mitigation Bulletin initial public release


Product Sets
 
The security vulnerability applies to the following combinations of products.

Primary Products:
Microsoft, Inc.ASP.NET SignalR 1.1 Base, .0, .1, .2, .3 | 2.0 Base
Microsoft, Inc.Exchange Server 2010 SP2, SP3 | 2013 CU1, CU2
Microsoft, Inc.Internet Explorer 6.0 Base, SP1, SP2 | 7.0 Base | 8.0 Base | 9.0 Base | 10.0 Base | 11.0 Base
Microsoft, Inc.Microsoft Visual Studio Team Foundation Server 2013 Original Release Base
Microsoft, Inc.Office 2007 SP3 | 2010 SP1, SP2 | 2013 32-bit editions, 64-bit editions | 2013 RT Base
Microsoft, Inc.Office SharePoint Server 2010 SP1, SP2 | 2013 Base
Microsoft, Inc.Windows 7 for 32-bit systems Base, SP1 | for x64-based systems Base, SP1
Microsoft, Inc.Windows RT Original Release Base | 8.1 Base
Microsoft, Inc.Windows Server 2003 Datacenter Edition Base, SP1, SP2 | Datacenter Edition, 64-bit (Itanium) Base, SP1, SP2 | Datacenter Edition x64 (AMD/EM64T) Base, SP1, SP2 | Enterprise Edition Base, SP1, SP2 | Enterprise Edition, 64-bit (Itanium) Base, SP1, SP2 | Enterprise Edition x64 (AMD/EM64T) Base, SP1, SP2 | Standard Edition Base, SP1, SP2 | Standard Edition, 64-bit (Itanium) Base, SP1, SP2 | Standard Edition x64 (AMD/EM64T) Base, SP1, SP2 | Web Edition Base, SP1, SP2
Microsoft, Inc.Windows Server 2008 Datacenter Edition Base, SP1, SP2 | Datacenter Edition, 64-bit Base, SP1, SP2 | Itanium-Based Systems Edition Base, SP1, SP2 | Enterprise Edition Base, SP1, SP2 | Enterprise Edition, 64-bit Base, SP1, SP2 | Essential Business Server Standard Base, SP1, SP2 | Essential Business Server Premium Base, SP1, SP2 | Essential Business Server Premium, 64-bit Base, SP1, SP2 | Standard Edition Base, SP1, SP2 | Standard Edition, 64-bit Base, SP1, SP2 | Web Server Base, SP1, SP2 | Web Server, 64-bit Base, SP1, SP2
Microsoft, Inc.Windows Server 2008 R2 x64-Based Systems Edition Base, SP1 | Itanium-Based Systems Edition Base, SP1
Microsoft, Inc.Windows Server 2012 Original Release Base
Microsoft, Inc.Windows Server 2012 R2 Original Release Base
Microsoft, Inc.Windows Vista Home Basic Base, SP1, SP2 | Home Premium Base, SP1, SP2 | Business Base, SP1, SP2 | Enterprise Base, SP1, SP2 | Ultimate Base, SP1, SP2 | Home Basic x64 Edition Base, SP1, SP2 | Home Premium x64 Edition Base, SP1, SP2 | Business x64 Edition Base, SP1, SP2 | Enterprise x64 Edition Base, SP1, SP2 | Ultimate x64 Edition Base, SP1, SP2
Microsoft, Inc.Windows XP Home Edition Base, SP1, SP2, SP3 | Professional Edition Base, SP1, SP2, SP3 | Professional x64 (AMD/EM64T) Base, SP2 | Tablet PC Edition SP3 | Media Center Edition SP3
Microsoft, Inc.Office Web Apps 2013 Base
Microsoft, Inc.Windows 8 for 32-bit systems Base | for x64-based systems Base
Microsoft, Inc.Windows 8.1 for 32-bit Systems Base | for 64-bit Systems Base

Associated Products:
CiscoCisco Broadband Troubleshooter Original Release Base | 3.1 Base | 3.2 Base
CiscoCisco Building Broadband Service Manager (BBSM) Original Release Base | 2.5 .1 | 3.0 Base | 4.0 Base, .1 | 4.2 Base | 4.3 Base | 4.4 Base | 4.5 Base | 5.0 Base | 5.1 Base | 5.2 Base
CiscoCisco CNS Network Registrar 2.5 Base | 3.0 Base | 3.5 Base, .1 | 5.0 Base | 5.5 Base, .13 | 6.0 .5, .5.2, .5.3, .5.4 | 6.1 Base, .1, .1.1, .1.2, .1.3, .1.4
CiscoCisco Collaboration Server Dynamic Content Adapter (DCA) Original Release Base | 1.0 Base | 2.0 Base, (1)_SR2
CiscoCisco Computer Telephony Integration (CTI) Option 4.7 (0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4 | 5.1 (0)_SR1, (0)_SR2, (0)_SR3 | 6.0 (0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5 | 7.0 (0)_SR1, (0)_SR2 | 7.1 (2), (3), (4), (5)
CiscoCisco Conference Connection 1.1 (3), (3)spA | 1.2 Base, (1), (2), (2)SR1, (2)SR2
CiscoCisco E-mail Manager Original Release Base | 4.0 Base, .5i, .6 | 5.0 Base, (0)_SR1, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR6, (0)_SR7
CiscoCisco Emergency Responder 1.1 Base, (3), (4) | 1.2 Base, (1), (1)SR1, (2), (2)sr1, (3)a, (3)SR1, (3a)SR2 | 1.3 Base, (1a), (2)
CiscoCisco Intelligent Contact Manager (ICM) Original Release Base | 4.6 (2)_SR1, (2)_SR2, (2)_SR3, (2)_SR4, (2)_SR5, (2)_SR6 | 5.0 (0), (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR7, (0)_SR8, (0)_SR9, (0)_SR10, (0)_SR11, (0)_SR12, (0)_SR13 | 6.0 (0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR6, (0)_SR7, (0)_SR8, (0)_SR9, (0)_SR10 | 7.0 (0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4 | 7.1 (2), (3), (4), (5)
CiscoCisco Unified Contact Center Enterprise Edition Base, 4.6.2, 5.0, 6.0, 7.0, 7.1, 7.1.1, 7.1.3 | Express Edition Base, 2.0, 2.0.2, 2.1, 2.1.1a, 2.1.2, 2.1.3, 2.2, 2.2.1, 2.2.2, 2.2.3b, 2.2.3b_spE, 3.0, 3.0.2, 3.0.3a_spA, 3.0.3a_spB, 3.0.3a_spC, 3.0.3a_spD, 3.1, 3.1(1)_SR1, 3.1(1)_SR2, 3.1(2)_SR1, 3.1(2)_SR2, 3.1(2)_SR3, 3.1(2)_SR4, 3.1(3)_SR2, 3.1(3)_SR3, 3.1(3)_SR4, 3.1(3)_SR5, 3.5, 3.5.1, 3.5(1)_SR1, 3.5(2)_SR1, 3.5(3), 3.5(3)_SR1, 3.5(3)_SR2, 3.5(3)_SR3, 3.5(4)_SR1, 3.5(4)_SR2, 4.0, 4.0(1)_SR1, 4.0(4)_SR1, 4.0(5)_SR1, 4.1, 4.1(1)_SR1, 4.5, 4.5(2)_SR1, 4.5(2)_SR2, 5.0(1)_SR1 | Hosted Edition Base, 4.6.2, 5.0, 6.0, 7.0, 7.1, 7.1.1, 7.1.3
CiscoCisco Unified IP IVR 2.0 .2 | 2.1 .1a, .2, .3 | 2.2 (5), .1, .2, .3b, .3b_spE, .5, .4 | 3.0 .1_spB, .2, .3a_spA, .3a_spB, .3a_spC, .3a_spD | 3.1 (1)_SR2, (2)_SR1, (2)_SR2, (2)_SR3, (3)_SR1, (3)_SR2, (3)_SR3, (3)_SR4, (3)_SR5 | 3.5 (1)_SR1, (1)_SR2, (1)_SR3, (2)_SR1, (3)_SR1, (3)_SR2, (3)_SR3, (4)_SR1, (4)_SR2, .1, .3 | 4.0 (1)_SR1, (4)_SR1 | 4.1 (1)_SR1 | 4.5 (2)_SR1, (2)_SR2 | 5.0 (1)_SR1
CiscoCisco IP Interoperability and Collaboration System (IPICS) 1.0 (1.1)
CiscoCisco IP Queue Manager 2.2 Base
CiscoCisco IP/VC 3540 Application Server Module 3.2 .0.1, .138 | 3.5 .0.8
CiscoCisco IP/VC 3540 Rate Matching Module 3.0 .9
CiscoCisco Media Blender Original Release Base | 3.0 Base | 4.0 Base | 5.0 Base, (0)_SR1, (0)_SR2
CiscoCisco Networking Services for Active Directory Original Release Base
CiscoCisco Outbound Option Original Release Base
CiscoCisco Personal Assistant 1.0 Base, (1) | 1.1 Base | 1.3 Base, .1, .2, .3, .4 | 1.4 Base, .2, .3, .4, .5, .6
CiscoCisco Remote Monitoring Suite Option 1.0 Base | 2.0 Base, (0)_SR1
CiscoCisco Secure Access Control Server (ACS) for Windows 2.6 Base | 2.6.3.2 Base | 2.6.4 Base | 2.6.4.4 Base | 3.0 Base | 3.0.1 Base | 3.0.1.40 Base | 3.0.2 Base | 3.0.3 Base | 3.0.3.6 Base | 3.0.4 Base | 3.1.1 Base | 3.1.1.27 Base | 3.1.2 Base | 3.2 Base | 3.2.1 Base | 3.2.3 Base | 3.3.1 Base | 3.3.2.2 Base | 3.3.1.16 Base | 3.3.3.11 Base | 4.0 Base | 4.0.1 Base | 4.0.1.27 Base | 4.1.1.23 Base
CiscoCisco Secure Access Control Server Solution Engine (ACSE) 3.1 Base, .1 | 3.2 Base, .1.20, .2.5, .3 | 3.3 Base, .1, .1.16, .2.2, .3, .4, .4.12 | 4.0 Base, .1, .1.42, .1.44, .1.49 | 4.1 Base, .1.23, .1.23.3, .3, .3.12
CiscoCisco Secure User Registration Tool (URT) Original Release Base | 1.2 Base, .1 | 2.0 Base, .7, .8 | 2.5 Base, .1, .2, .3, .4, .5
CiscoCisco SN 5420 Storage Router 1.1 Base, .3, .4, .5, .7, .8 | 2.1 .1, .2
CiscoCisco SN 5428-2 Storage Router 3.2 .1, .2 | 3.3 .1, .2 | 3.4 .1 | 3.5 Base, .1, .2, .3, .4
CiscoCisco Trailhead Original Release Base | 4.0 Base
CiscoCisco Unified Communications Manager Original Release Base | 1.0 Base | 2.0 Base | 3.0 Base | 3.0.3(a) Base | 3.1 Base, .1, .2, .3a | 3.1(1) Base | 3.1(2) Base | 3.1(2)SR3 Base | 3.1(3) Base | 3.1(3)SR2 Base | 3.1(3)SR4 Base | 3.2 Base | 3.2(3)SR3 Base | 3.3 Base | 3.3(2)SPc Base | 3.3(3) Base | 3.3(3)ES61 Base | 3.3(3)SR3 Base | 3.3(3)SR4a Base | 3.3(3a) Base | 3.3(4) Base | 3.3(4)ES25 Base | 3.3(4)SR2 Base | 3.3(4c) Base | 3.3(5) Base | 3.3(5)ES24 Base | 3.3(5)SR1 Base | 3.3(5)SR1a Base | 3.3(5)SR2 Base | 3.3(5)SR2a Base | 3.3(5)SR3 Base | 3.3(59) Base | 3.3(61) Base | 3.3(63) Base | 3.3(64) Base | 3.3(65) Base | 3.3(66) Base | 3.3(67.5) Base | 3.3(68.1) Base | 3.3(71.0) Base | 3.3(74.0) Base | 3.3(78) Base | 3.3(76) Base | 4.0 .1, .2 | 4.0(2a)ES40 Base | 4.0(2a)ES56 Base | 4.0(2a)SR2b Base | 4.0(2a)SR2c Base | 4.1 Base | 4.1(2) Base | 4.1(2)ES33 Base | 4.1(2)ES50 Base | 4.1(2)SR1 Base | 4.1(3) Base | 4.1(3)ES Base | 4.1(3)ES07 Base | 4.1(3)ES24 Base | 4.1(3)SR Base | 4.1(3)SR1 Base | 4.1(3)SR2 Base | 4.1(3)SR3 Base | 4.1(3)SR3b Base | 4.1(3)SR3c Base | 4.1(3)SR4 Base | 4.1(3)SR4b Base | 4.1(3)SR4d Base | 4.1(3)SR5 Base | 4.1(4) Base | 4.1(9) Base | 4.1(17) Base | 4.1(19) Base | 4.1(22) Base | 4.1(23) Base | 4.1(25) Base | 4.1(26) Base | 4.1(27.7) Base | 4.1(28.2) Base | 4.1(30.4) Base | 4.1(36) Base | 4.1(39) Base | 4.2(1) Base | 4.2(1)SR1b Base | 4.2(1.02) Base | 4.2(1.05.3) Base | 4.2(1.06) Base | 4.2(1.07) Base | 4.2(3) Base | 4.2(3)SR1 Base | 4.2(3)SR2 Base | 4.2(3.08) Base | 4.2(3.2.3) Base | 4.2(3.3) Base | 4.2(3.13) Base | 4.3(1) Base | 4.3(1)SR Base | 4.3(1.57) Base
CiscoCisco Unified Customer Voice Portal (CVP) 3.0 (0), (0)SR1, (0)SR2 | 3.1 (0), (0)SR1, (0)SR2 | 4.0 (0), (1), (1)SR1, (2)
CiscoCisco Unified MeetingPlace 4.3 Base | 5.3 Base | 5.2 Base | 5.4 Base | 6.0 Base
CiscoCisco Unified MeetingPlace Express 1.1 Base | 1.2 Base | 2.0 Base
CiscoCisco Unity Original Release Base | 2.0 Base | 2.1 Base | 2.2 Base | 2.3 Base | 2.4 Base | 2.46 Base | 3.0 Base, .1 | 3.1 Base, .2, .3, .5, .6 | 3.2 Base | 3.3 Base | 4.0 Base, .1, .2, .3, .3b, .4, .5 | 4.1 Base, .1 | 4.2 Base, .1, .1 ES27 | 5.0 (1) | 7.0 (2)
CiscoCisco Unity Express 1.0.2 Base | 1.1.1 Base | 1.1.2 Base | 2.0.1 Base | 2.0.2 Base | 2.1.1 Base | 2.1.2 Base | 2.1.3 Base | 2.2.0 Base | 2.2.1 Base | 2.2.2 Base | 2.3.0 Base | 2.3.1 Base
CiscoCisco Wireless Control System (WCS) Software 1.0 Base | 2.0 Base, 44.14, 44.24 | 2.2 .0, .111.0 | 3.0 Base, .101.0, .105.0 | 3.1 Base, .20.0, .33.0, .35.0 | 3.2 Base, .23.0, .25.0, .40.0, .51.0, .64.0 | 4.0 Base, .1.0, .43.0, .66.0, .81.0, .87.0, .96.0, .97.0 | 4.1 Base, .83.0
CiscoCiscoWorks IP Telephony Environment Monitor (ITEM) 1.3 Base | 1.4 Base | 2.0 Base
CiscoCiscoWorks LAN Management Solution (LMS) 1.3 Base | 2.2 Base | 2.5 Base | 2.6 Base
CiscoCiscoWorks QoS Policy Manager (QPM) 2.0 Base, .1, .2, .3 | 2.1 .2 | 3.0 Base, .1 | 3.1 Base | 3.2 Base, .1, .2, .3
CiscoCiscoWorks Routed WAN Management Solution (RWAN) 1.0 Base | 1.1 Base | 1.2 Base | 1.3 Base, .1
CiscoCiscoWorks Small Network Management Solution (SNMS) 1.0 Base | 1.5 Base
CiscoCiscoWorks VPN/Security Management Solution (VMS) 1.0 Base | 2.0 Base | 2.1 Base | 2.2 Base | 2.3 Base
CiscoCisco Collaboration Server 3.0 Base | 3.01 Base | 3.02 Base | 4.0 Base | 5.0 Base
CiscoCisco DOCSIS CPE Configurator 1.0 Base | 1.1 Base | 2.0 Base
CiscoCisco Unified IP Interactive Voice Response (IVR) 2.0 Base | 2.1 Base
CiscoCisco Service Control Engine (SCE) 3.0 Base | 3.1 Base
CiscoCisco Transport Manager Original Release Base | 2.0 Base | 2.1 Base | 2.2 Base, .1 | 3.0 Base, .1, .2 | 3.1 Base | 3.2 Base | 4.0 Base | 4.1 Base, .4, .6, .6.6.1 | 4.6 Base | 4.7 Base | 5.0 Base, .0.867.2, .1.873.2, .2, .2.92.1, .2.99.1, .2.105.1, .2.110.1 | 6.0 Base, .0.405.1, .0.407.1, .0.412.1 | 7.0 Base, .0.370.1, .0.372.1, .0.377.1, .0.389.1, .0.400.1, .395.1 | 7.2 Base, .0.199.1
Microsoft, Inc.Windows 7 for 32-bit systems | for x64-based systems
Microsoft, Inc.Windows RT Original Release | 8.1
Microsoft, Inc.Windows Server 2003 Datacenter Edition | Datacenter Edition, 64-bit (Itanium) | Datacenter Edition x64 (AMD/EM64T) | Enterprise Edition | Enterprise Edition, 64-bit (Itanium) | Enterprise Edition x64 (AMD/EM64T) | Standard Edition | Standard Edition, 64-bit (Itanium) | Standard Edition x64 (AMD/EM64T) | Web Edition
Microsoft, Inc.Windows Server 2008 Datacenter Edition | Datacenter Edition, 64-bit | Itanium-Based Systems Edition | Enterprise Edition | Enterprise Edition, 64-bit | Essential Business Server Standard | Essential Business Server Premium | Essential Business Server Premium, 64-bit | Standard Edition | Standard Edition, 64-bit | Web Server | Web Server, 64-bit
Microsoft, Inc.Windows Server 2008 R2 x64-Based Systems Edition | Itanium-Based Systems Edition
Microsoft, Inc.Windows Server 2012 Original Release
Microsoft, Inc.Windows Server 2012 R2 Original Release
Microsoft, Inc.Windows Vista Home Basic | Home Premium | Business | Enterprise | Ultimate | Home Basic x64 Edition | Home Premium x64 Edition | Business x64 Edition | Enterprise x64 Edition | Ultimate x64 Edition
Microsoft, Inc.Windows XP Home Edition | Professional Edition | Professional Edition, 64-bit (Itanium) SP2, SP3 | Professional x64 (AMD/EM64T) | Tablet PC Edition | Media Center Edition
Microsoft, Inc.Windows 8 for 32-bit systems | for x64-based systems
Microsoft, Inc.Windows 8.1 for 32-bit Systems | for 64-bit Systems




Alerts and bulletins on the Cisco Security Intelligence Operations Portal are highlighted by analysts in the Cisco Threat Operations Center and represent a subset of the comprehensive content that is available through Cisco Security IntelliShield Alert Manager Service. This customizable threat and vulnerability alert service provides security staff with access to timely, accurate, and credible information about threats and vulnerabilities that may affect their environment.


LEGAL DISCLAIMER
The urgency and severity ratings of this alert are not tailored to individual users; users may value alerts differently based upon their network configurations and circumstances. THE ALERT, AND INFORMATION CONTAINED THEREIN, ARE PROVIDED ON AN "AS IS" BASIS AND DO NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE ALERT, AND INFORMATION CONTAINED THEREIN, OR MATERIALS LINKED FROM THE ALERT, IS AT YOUR OWN RISK. INFORMATION IN THIS ALERT AND ANY RELATED COMMUNICATIONS IS BASED ON OUR KNOWLEDGE AT THE TIME OF PUBLICATION AND IS SUBJECT TO CHANGE WITHOUT NOTICE. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE ALERTS AT ANY TIME.
Powered by  IntelliShield