Products & Services
Support

Product Categories


Popular Downloads


Manage Software

How to Buy

For Home

Linksys Products Store
Linksys is now part of Belkin
Products for everyone

All Ordering Options

Training & Events Partners
Guest

Cisco Applied Mitigation Bulletin

Identifying and Mitigating Exploitation of the Multiple Vulnerabilities in Cisco Unified Communications Manager

 
Threat Type:IntelliShield: Applied Mitigation Bulletin
IntelliShield ID:29846
Version:1
First Published:2013 July 17 16:02 GMT
Last Published:2013 July 17 16:02 GMT
Port: 8080, 8443
CVE:CVE-2013-3402 , CVE-2013-3403 , CVE-2013-3404 , CVE-2013-3412 , CVE-2013-3433 , CVE-2013-3434
Urgency:Unlikely Use
Credibility:Confirmed
Severity:Mild Damage
 
Version Summary:Cisco Applied Mitigation Bulletin initial public release
 

Cisco Response

This Applied Mitigation Bulletin is a companion document to the PSIRT Security Advisory Multiple Vulnerabilities in Cisco Unified Communications Manager and provides identification and mitigation techniques that administrators can deploy on Cisco network devices.

Vulnerability Characteristics

There are multiple vulnerabilities in Cisco Unified Communications Manager (Unified CM). The following subsections summarize these vulnerabilities:

Blind Structured Query Language (SQL) Injection Vulnerabilities: These vulnerabilities can be exploited remotely without authentication and without end-user interaction. Successful exploitation of these vulnerabilities could allow information disclosure, which enables an attacker to learn information about the affected device. The attack vector for exploitation is through IPv4 and IPv6 packets using TCP ports 8080 and 8443.

These vulnerabilities have been assigned Common Vulnerabilities and Exposures (CVE) identifiers CVE-2013-3404 and CVE-2013-3412.

Command Injection Vulnerability: This vulnerability can be exploited remotely with authentication and could allow an attacker to execute commands on the underlying operating system with the privileges of the database user. The attack vector for exploitation is through IPv4 and IPv6 packets using TCP port 8443.

This vulnerability has been assigned CVE identifier CVE-2013-3402.

Privilege Escalation Vulnerability: This vulnerability can be exploited remotely with authentication and could allow a local attacker to escalate privileges on the system. The attack vector for exploitation is through IPv4 and IPv6 packets using TCP port 8443.

This vulnerability has been assigned CVE identifier CVE-2013-3403.

Mitigation Technique Overview

Cisco devices provide several countermeasures for these vulnerabilities. Administrators are advised to consider these protection methods to be general security best practices for infrastructure devices and the traffic that transits the network. This section of the document provides an overview of these techniques.

Cisco IOS Software can provide effective means of exploit prevention using transit access control lists, (tACLs).

This protection mechanism filters and drops packets that are attempting to exploit these vulnerabilities.

Effective exploit prevention can also be provided by the Cisco ASA 5500 Series Adaptive Security Appliance, Cisco Catalyst 6500 Series ASA Services Module (ASASM), and the Firewall Services Module (FWSM) for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers using tACLs.

This protection mechanism filters and drops packets that are attempting to exploit these vulnerabilities.

Cisco IOS NetFlow records can provide visibility into network-based exploitation attempts.

Cisco IOS Software, Cisco ASA, Cisco ASASM, Cisco FWSM firewalls, and Cisco ACE Application Control Engine Appliance and Module can provide visibility through syslog messages and counter values displayed in the output from show commands.

Risk Management

Organizations are advised to follow their standard risk evaluation and mitigation processes to determine the potential impact of these vulnerabilities. Triage refers to sorting projects and prioritizing efforts that are most likely to be successful. Cisco has provided documents that can help organizations develop a risk-based triage capability for their information security teams. Risk Triage for Security Vulnerability Announcements and Risk Triage and Prototyping can help organizations develop repeatable security evaluation and response processes.

Device-Specific Mitigation and Identification

Caution: The effectiveness of any mitigation technique depends on specific customer situations such as product mix, network topology, traffic behavior, and organizational mission. As with any configuration change, evaluate the impact of this configuration prior to applying the change.

Specific information about mitigation and identification is available for these devices:

Cisco IOS Routers and Switches

Mitigation: Transit Access Control Lists

To protect the network from traffic that enters the network at ingress access points, which may include Internet connection points, partner and supplier connection points, or VPN connection points, administrators are advised to deploy transit access control lists (tACLs) to perform policy enforcement. Administrators can construct a tACL by explicitly permitting only authorized traffic to enter the network at ingress access points or permitting authorized traffic to transit the network in accordance with existing security policies and configurations. A tACL workaround cannot provide complete protection against these vulnerabilities when the attack originates from a trusted source address.

The tACL policy denies unauthorized IPv4 and IPv6 packets on TCP ports 8080 and 8443 that are sent to affected devices. In the following example, 192.168.60.0/24 and 2001:DB8:1:60::/64 represent the IP address space that is used by the affected devices, and the hosts at 192.168.100.1 and 2001:DB8::100:1 are considered trusted sources that require access to the affected devices. Care should be taken to allow required traffic for routing and administrative access prior to denying all unauthorized traffic.

Additional information about tACLs is in Transit Access Control Lists: Filtering at Your Edge.
!
!-- Include explicit permit statements for trusted sources that
!-- require access on the vulnerable TCP ports 
!
access-list 150 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 8080
access-list 150 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 8443
!
!-- The following vulnerability-specific access control entries
!-- (ACEs) can aid in identification of attacks
!
access-list 150 deny tcp any 192.168.60.0 0.0.0.255 eq 8080
access-list 150 deny tcp any 192.168.60.0 0.0.0.255 eq 8443
!
!-- Permit or deny all other Layer 3 and Layer 4 traffic in accordance
!-- with existing security policies and configurations
!
!-- Explicit deny for all other IP traffic
!
access-list 150 deny ip any any
!
!-- Create the corresponding IPv6 tACL
!
ipv6  access-list IPv6-Transit-ACL-Policy
  !  
  !-- Include explicit permit statements for trusted sources that
  !-- require access on the vulnerable TCP ports 
  !
  permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 8080
  permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 8443
  !
  !-- The following vulnerability-specific ACEs can 
  !-- aid in identification of attacks to global and
  !-- link-local addresses
  !
  deny tcp any 2001:DB8:1:60::/64 eq 8080
  deny tcp any 2001:DB8:1:60::/64 eq 8443
  !
  !-- Permit or deny all other Layer 3 and Layer 4 traffic in 
  !-- accordance with existing security policies and configurations
  !-- and allow IPv6 neighbor discovery packets, which
  !-- include neighbor solicitation packets and neighbor
  !-- advertisement packets
  !
  permit icmp any any nd-ns
  permit icmp any any nd-na
  ! 
!-- Explicit deny for all other IPv6 traffic !

deny ipv6 any any ! ! !-- Apply tACLs to interfaces in the ingress direction ! interface GigabitEthernet0/0 ip access-group 150 in ipv6 traffic-filter IPv6-Transit-ACL-Policy in
Note that filtering with an interface access list will elicit the transmission of ICMP unreachable messages back to the source of the filtered traffic. Generating these messages could have the undesired effect of increasing CPU utilization on the device. In Cisco IOS Software, ICMP unreachable generation is limited to one packet every 500 milliseconds by default. ICMP unreachable message generation can be disabled using the interface configuration commands no ip unreachables and no ipv6 unreachables. ICMP unreachable rate limiting can be changed from the default using the global configuration commands ip icmp rate-limit unreachable interval-in-ms and ipv6 icmp error-interval interval-in-ms.

Identification: Transit Access Control Lists

After the administrator applies the tACL to an interface, show ip access-lists and show ipv6 access-list commands will identify the number of IPv4 and IPv6 packets on TCP ports 8080 and 8443 that have been filtered. Administrators are advised to investigate filtered packets to determine whether they are attempts to exploit these vulnerabilities. Example output for show ip access-lists 150 and show ipv6 access-list IPv6-Transit-ACL-Policy follows:
router#show ip access-lists 150
Extended IP access list 150
    10 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 8080
    20 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 8443
    30 deny tcp any 192.168.60.0 0.0.0.255 eq 8080 (19 matches)
    40 deny tcp any 192.168.60.0 0.0.0.255 eq 8443 (47 matches)
    50 deny ip any any
router#
In the preceding example, access list 150 has dropped the following packets received from an untrusted host or network:
  • 19 packets on TCP port 8080 for ACE line 30
  • 47 packets on TCP port 8443 for ACE line 40
router#show ipv6 access-list IPv6-Transit-ACL-Policy 
IPv6 access list IPv6-Transit-ACL-Policy
    permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 8080 (18 matches) sequence 10
    permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 8443 (37 matches) sequence 20
    deny tcp any 2001:DB8:1:60::/64 eq 8080 (20 matches) sequence 30
    deny tcp any 2001:DB8:1:60::/64 eq 8443 (21 matches) sequence 40
    permit icmp any any nd-ns (31 matches) sequence 50
    permit icmp any any nd-na (11 matches) sequence 60
    deny ipv6 any any (40 matches) sequence 70
In the preceding example, access list IPv6-Transit-ACL-Policy has dropped the following packets received from an untrusted host or network:
  • 20 packets on TCP port 8080 for ACE line 30
  • 21 packets on TCP port 8443 for ACE line 40
For additional information about investigating incidents using ACE counters and syslog events, reference the Identifying Incidents Using Firewall and IOS Router Syslog Events Cisco Security Intelligence Operations white paper.

Administrators can use Embedded Event Manager to provide instrumentation when specific conditions are met, such as ACE counter hits. The Cisco Security Intelligence Operations white paper Embedded Event Manager in a Security Context provides additional details about how to use this feature.

Identification: Access List Logging

The log and log-input access control list (ACL) option will cause packets that match specific ACEs to be logged. The log-input option enables logging of the ingress interface in addition to the packet source and destination IP addresses and ports.

Caution: Access control list logging can be very CPU intensive and must be used with extreme caution. Factors that drive the CPU impact of ACL logging are log generation, log transmission, and process switching to forward packets that match log-enabled ACEs.

For Cisco IOS Software, the ip access-list logging interval interval-in-ms command can limit the effects of process switching induced by IPv4 ACL logging. The logging rate-limit rate-per-second [except loglevel] command limits the impact of log generation and transmission.

The CPU impact from ACL logging can be addressed in hardware on the Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers with Supervisor Engine 720 or Supervisor Engine 32 using optimized ACL logging.

For additional information about the configuration and use of ACL logging, reference the Understanding Access Control List Logging Cisco Security Intelligence Operations white paper.

Cisco IOS NetFlow and Cisco IOS Flexible NetFlow

Identification: IPv4 Traffic Flow Identification Using Cisco IOS NetFlow

Administrators can configure Cisco IOS NetFlow on Cisco IOS routers and switches to aid in the identification of IPv4 traffic flows that may be attempts to exploit these vulnerabilities. Administrators are advised to investigate flows to determine whether they are attempts to exploit these vulnerabilities or whether they are legitimate traffic flows.
router#show ip cache flow
IP packet size distribution (90784136 total packets):
   1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
   .000 .698 .011 .001 .004 .005 .000 .004 .000 .000 .003 .000 .000 .000 .000

    512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
   .000 .001 .256 .000 .010 .000 .000 .000 .000 .000 .000

IP Flow Switching Cache, 4456704 bytes
  1885 active, 63651 inactive, 59960004 added
  129803821 ager polls, 0 flow alloc failures
  Active flows timeout in 30 minutes
  Inactive flows timeout in 15 seconds
IP Sub Flow Cache, 402056 bytes
  0 active, 16384 inactive, 0 added, 0 added to flow
  0 alloc failures, 0 force free
  1 chunk, 1 chunk added
  last clearing of statistics never
Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
--------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
TCP-Telnet    11393421      2.8         1    48      3.1       0.0       1.4
TCP-FTP            236      0.0        12    66      0.0       1.8       4.8
TCP-FTPD            21      0.0     13726  1294      0.0      18.4       4.1
TCP-WWW          22282      0.0        21  1020      0.1       4.1       7.3
TCP-X              719      0.0         1    40      0.0       0.0       1.3
TCP-BGP              1      0.0         1    40      0.0       0.0      15.0
TCP-Frag         70399      0.0         1   688      0.0       0.0      22.7
TCP-other     47861004     11.8         1   211     18.9       0.0       1.3
UDP-DNS            582      0.0         4    73      0.0       3.4      15.4
UDP-NTP         287252      0.0         1    76      0.0       0.0      15.5
UDP-other       310347      0.0         2   230      0.1       0.6      15.9
ICMP             11674      0.0         3    61      0.0      19.8      15.5
IPv6INIP            15      0.0         1  1132      0.0       0.0      15.4
GRE                  4      0.0         1    48      0.0       0.0      15.3 
Total:        59957957     14.8         1   196     22.5       0.0       1.5

SrcIf         SrcIPaddress    DstIf         DstIPaddress    Pr SrcP DstP  Pkts
Gi0/0         192.168.10.201  Gi0/1         192.168.60.102  11 0984 00A1     1
Gi0/0         192.168.11.54   Gi0/1         192.168.60.158  06 849C 1F90    21
Gi0/1         192.168.150.60  Gi0/0         10.89.16.226    06 0016 12CA     1
Gi0/0         192.168.13.97   Gi0/1         192.168.60.28   06 4830 20FB    15
Gi0/0         192.168.10.17   Gi0/1         192.168.60.97   11 0B89 00A1     1
Gi0/0         10.88.226.1     Gi0/1         192.168.202.22  06 7646 1F90     1
Gi0/0         192.168.12.185  Gi0/1         192.168.60.239  11 0BD7 00A1     1
Gi0/0         10.89.16.226    Gi0/1         192.168.150.60  06 7647 20FB     1
router#
In the preceding example, there are multiple flows for TCP ports 8080 (hex value 1F90) and 8443 (hex value 20FB).

As shown in the following example, to view only the packets on TCP ports 8080 (hex value 1F90) and 8443 (hex value 20FB), use the show ip cache flow | include SrcIf|_06_.*(1F90|20FB)_ command to display the related Cisco NetFlow records:

TCP Flows
router#show ip cache flow | include SrcIf|_06_.*(1F90|20FB)_
SrcIf         SrcIPaddress     DstIf         DstIPaddress    Pr SrcP DstP  Pkts
Gi0/0         192.168.12.110   Gi0/1         192.168.60.163  06 849B 20FB     9
Gi0/0         192.168.11.230   Gi0/1         192.168.60.20   06 4730 1F90    11
Gi0/0         192.168.11.131   Gi0/1         192.168.60.245  06 849C 1F90    21
Gi0/0         192.168.13.7     Gi0/1         192.168.60.162  06 4830 20FB    15
Gi0/0         192.168.41.86    Gi0/1         192.168.60.27   06 849F 1F90     8
router#

Identification: IPv6 Traffic Flow Identification Using Cisco IOS NetFlow

Administrators can configure Cisco IOS NetFlow on Cisco IOS routers and switches to aid in the identification of IPv6 traffic flows that may be attempts to exploit the vulnerabilities that are described in this document. Administrators are advised to investigate flows to determine whether they are attempts to exploit these vulnerabilities or whether they are legitimate traffic flows.

The following output is from a Cisco IOS device running Cisco IOS Software 12.4 mainline train. The command syntax will vary for different Cisco IOS Software trains.
router#show ipv6 flow cache

IP packet size distribution (50078919 total packets):
   1-32  64   96  128  160  192  224  256  288  320  352  384  416  448  480
   .000 .990 .001 .008 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
    512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
   .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
IP Flow Switching Cache, 475168 bytes
  8 active, 4088 inactive, 6160 added
  1092984 ager polls, 0 flow alloc failures
  Active flows timeout in 30 minutes
  Inactive flows timeout in 15 seconds
IP Sub Flow Cache, 33928 bytes
  16 active, 1008 inactive, 12320 added, 6160 added to flow
  0 alloc failures, 0 force free
  1 chunk, 1 chunk added
SrcAddress        InpIf    DstAddress       OutIf    Prot SrcPrt DstPrt Packets
2001:DB...06::201 Gi0/0    2001:DB...28::20 Local    0x11 0x16C4 0x20FB 1464
2001:DB...6A:5BA6 Gi0/0    2001:DB...28::21 Gi0/1    0x3A 0x0000 0x8000 1191
2001:DB...6A:5BA6 Gi0/0    2001:DB...134::3 Gi0/1    0x3A 0x0000 0x8000 1191
2001:DB...6A:5BA6 Gi0/0    2001:DB...128::4 Gi0/1    0x3A 0x0000 0x8000 1192    
2001:DB...6A:5BA6 Gi0/0    2001:DB...128::2 Gi0/1    0x06 0x160A 0x20FB 1597
2001:DB...06::201 Gi0/0    2001:DB...128::3 Gi0/1    0x11 0x1610 0x1F90 1001  
2001:DB...06::201 Gi0/0    2001:DB...128::4 Gi0/1    0x11 0x1634 0x1F90 1292  
2001:DB...6A:5BA6 Gi0/0    2001:DB...128::3 Gi0/1    0x3A 0x0000 0x8000 1155
2001:DB...6A:5BA6 Gi0/0    2001:DB...146::3 Gi0/1    0x3A 0x0000 0x8000 1092
2001:DB...6A:5BA6 Gi0/0    2001:DB...144::4 Gi0/1    0x3A 0x0000 0x8000 1193 
To permit display of the full 128-bit IPv6 address, use the terminal width 132 exec mode command.

In the preceding example, there are multiple IPv6 flows on TCP ports 8080 (hex value 1F90) and 8443 (hex value 20FB).

As shown in the following example, to view only the packets on TCP ports 8080 (hex value 1F90) and 8443 (hex value 20FB), use the show ipv6 flow cache | include SrcIf|_06_.*(1F90|20FB)_ command to display the related Cisco NetFlow records:

TCP Flows
router#show ipv6 flow cache | include SrcIf|_06_.*(1F90|20FB)_
SrcAddress        InpIf    DstAddress       OutIf    Prot SrcPrt DstPrt Packets
2001:DB...6A:5BA6 Gi0/0    2001:DB...128::2 Gi0/1    0x06 0x3B20 0x20FB  498
2001:DB...6A:8437 Gi0/0    2001:DB...128::9 Gi0/1    0x06 0x1A98 0x1F90   83
router#

Identification: IPv4 Traffic Flow Identification Using Cisco Flexible NetFlow

Introduced in Cisco IOS Software Releases 12.2(31)SB2 and 12.4(9)T, Cisco IOS Flexible NetFlow improves original Cisco NetFlow by adding the capability to customize the traffic analysis parameters for the administrator's specific requirements. Original Cisco NetFlow uses a fixed seven tuples of IP information to identify a flow, whereas Cisco IOS Flexible NetFlow allows the flow to be user defined. It facilitates the creation of more complex configurations for traffic analysis and data export by using reusable configuration components.

The following example output is from a Cisco IOS device that is running a version of Cisco IOS Software in the 15.1T train. Although the syntax will be almost identical for the 12.4T and 15.0 trains, it may vary slightly depending on the actual Cisco IOS release being used. In the following configuration, Cisco IOS Flexible NetFlow will collect information on interface GigabitEthernet0/0 for incoming IPv4 flows based on source IPv4 address, as defined by the match ipv4 source address key field statement. Cisco IOS Flexible NetFlow will also include nonkey field information about source and destination IPv4 addresses, protocol, ports (if present), ingress and egress interfaces, and packets per flow.
!
!-- Configure key and nonkey fields
!-- in the user-defined flow record
!
flow record FLOW-RECORD-ipv4
 match ipv4 source address
 collect ipv4 protocol
 collect ipv4 destination address
 collect transport source-port
 collect transport destination-port
 collect interface input
 collect interface output
 collect counter packets
!
!-- Configure the flow monitor to
!-- reference the user-defined flow 
!-- record
!
flow monitor FLOW-MONITOR-ipv4
 record FLOW-RECORD-ipv4
!
!-- Apply the flow monitor to the interface
!-- in the ingress direction
!
interface GigabitEthernet0/0
 ip flow monitor FLOW-MONITOR-ipv4 input
The Cisco IOS Flexible NetFlow flow output is as follows:
router#show flow monitor FLOW-MONITOR-ipv4 cache format table
  Cache type:                               Normal
  Cache size:                                 4096
  Current entries:                               6
  High Watermark:                                1

  Flows added:                                   9181
  Flows aged:                                    9175
    - Active timeout      (  1800 secs)          9000
    - Inactive timeout    (    15 secs)           175
    - Event aged                                    0
    - Watermark aged                                0
    - Emergency aged                                0

IPV4 SRC ADDR   ipv4 dst addr   trns src port trns dst port intf input intf output pkts   ip prot
=============== =============== ============= ============= ========== =========== ====== =======
 192.168.10.201  192.168.60.102          1456          8080      Gi0/0       Gi0/1     18      6
 192.168.11.54   192.168.60.158           123           123      Gi0/0       Gi0/1   2212     17
 192.168.150.60    10.89.16.226          2567           443      Gi0/0       Gi0/1     13      6
 192.168.13.97    192.168.60.28          3451          8080      Gi0/0       Gi0/1     70      6
 192.168.10.17    192.168.60.97          4231          8443      Gi0/0       Gi0/1    146     17
   10.88.226.1   192.168.202.22          2678           443      Gi0/0       Gi0/1  10567      6
  10.89.16.226   192.168.150.60          3562            80      Gi0/0       Gi0/1  30012      6
To only view the packets on TCP ports 8080 and 8443, use the show flow monitor FLOW-MONITOR-ipv4 cache format table | include IPV4 DST ADDR |_(8080|8443)_.*_6_ command to display the related NetFlow records.

For more information about Cisco IOS Flexible NetFlow, refer to Flexible Netflow Configuration Guide, Cisco IOS Release 15M&T and Cisco IOS Flexible NetFlow Configuration Guide, Release 12.4T.

Identification: IPv6 Traffic Flow Identification Using Cisco IOS Flexible NetFlow

The following example output is from a Cisco IOS device that is running a version of Cisco IOS Software in the 15.1T train. Although the syntax will be almost identical for the 12.4T and 15.0 trains, it may vary slightly depending on the actual Cisco IOS release being used. In the following configuration, Cisco IOS Flexible NetFlow will collect information on interface GigabitEthernet0/0 for incoming IPv6 flows based on the source IPv6 address, as defined by the match ipv6 source address key field statement. Cisco IOS Flexible NetFlow will also include nonkey field information about source and destination IPv6 addresses, protocol, ports (if present), ingress and egress interfaces, and packets per flow.
!
!-- Configure key and nonkey fields
!-- in the user-defined flow record
!
flow record FLOW-RECORD-ipv6
 match ipv6 source address
 collect ipv6 protocol
 collect ipv6 destination address
 collect transport source-port
 collect transport destination-port
 collect interface input
 collect interface output
 collect counter packets
!
!-- Configure the flow monitor to
!-- reference the user-defined flow 
!-- record
!
flow monitor FLOW-MONITOR-ipv6
 record FLOW-RECORD-ipv6
!
!-- Apply the flow monitor to the interface
!-- in the ingress direction
!
interface GigabitEthernet0/0
  ipv6 flow monitor FLOW-MONITOR-ipv6 input
The Cisco IOS Flexible NetFlow flow output is as follows:
router#show flow monitor FLOW-MONITOR-ipv6 cache format table
  Cache type:                               Normal
  Cache size:                                 4096
  Current entries:                               6
  High Watermark:                                2

  Flows added:                                   539
  Flows aged:                                    532
    - Active timeout      (  1800 secs)          350
    - Inactive timeout    (    15 secs)          182
    - Event aged                                   0
    - Watermark aged                               0
    - Emergency aged                               0

IPV6 SRC ADDR     ipv6 dst addr     trns src port trns dst port intf input intf output pkts ip prot
================= ================= ============= ============= ========== =========== ==== =======
2001:DB...06::201  2001:DB...28::20           123           123      Gi0/1       Gi0/0   17      17
2001:DB...06::201  2001:DB...28::20          1265          8080      Gi0/1       Gi0/0 1237       6
2001:DB...06::201  2001:DB...28::20          1441          8443      Gi0/1       Gi0/0 2346       6
2001:DB...06::201  2001:DB...28::20          1890          8443      Gi0/1       Gi0/0 5009       6
2001:DB...06::201  2001:DB...28::20          2856          5060      Gi0/1       Gi0/0  486      17
2001:DB...06::201  2001:DB...28::20          3012            53      Gi0/1       Gi0/0 1016      17
2001:DB...06::201  2001:DB...28::20          2477            53      Gi0/1       Gi0/0 1563      17
To permit display of the full 128-bit IPv6 address, use the terminal width 132 exec mode command.

To view only the on TCP ports 8080 and 8443, use the show flow monitor FLOW-MONITOR-ipv6 cache format table | include IPV6 DST ADDR|_(8080|8443)_.*_6_ command to display the related Cisco IOS Flexible NetFlow records.

Cisco ASA, Cisco ASASM, and Cisco FWSM Firewalls

Mitigation: Transit Access Control Lists

To protect the network from traffic that enters the network at ingress access points, which may include Internet connection points, partner and supplier connection points, or VPN connection points, administrators are advised to deploy tACLs to perform policy enforcement. Administrators can construct a tACL by explicitly permitting only authorized traffic to enter the network at ingress access points or permitting authorized traffic to transit the network in accordance with existing security policies and configurations. A tACL workaround cannot provide complete protection against these vulnerabilities when the attack originates from a trusted source address.

The tACL policy denies unauthorized IPv4 and IPv6 packets on TCP ports 8080 and 8443 that are sent to affected devices. In the following example, 192.168.60.0/24 and 2001:DB8:1:60::/64 represent the IP address space that is used by the affected devices, and the hosts at 192.168.100.1 and 2001:DB8::100:1 are considered trusted sources that require access to the affected devices. Care should be taken to allow required traffic for routing and administrative access prior to denying all unauthorized traffic.

Additional information about tACLs is in Transit Access Control Lists: Filtering at Your Edge.
!
!-- Include explicit permit statements for trusted sources
!-- that require access on the vulnerable TCP ports 
!
access-list tACL-Policy extended permit tcp host 192.168.100.1 
     192.168.60.0 255.255.255.0 eq 8080
access-list tACL-Policy extended permit tcp host 192.168.100.1 
     192.168.60.0 255.255.255.0 eq 8443
!
!-- The following vulnerability-specific access control entries
!-- (ACEs) can aid in identification of attacks
!
access-list tACL-Policy extended deny tcp any 192.168.60.0 255.255.255.0 eq 8080
access-list tACL-Policy extended deny tcp any 192.168.60.0 255.255.255.0 eq 8443
!
!-- Permit or deny all other Layer 3 and Layer 4 traffic in accordance
!-- with existing security policies and configurations
!
!-- Explicit deny for all other IP traffic
!
access-list tACL-Policy extended deny ip any any
!
!-- Create the corresponding IPv6 tACL
!
!-- Include explicit permit statements for trusted sources that
!-- require access on the vulnerable TCP ports 
!
ipv6 access-list IPv6-tACL-Policy permit tcp host 2001:DB8::100:1
          2001:db8:1:60::/64 eq 8080
ipv6 access-list IPv6-tACL-Policy permit tcp host 2001:DB8::100:1
          2001:db8:1:60::/64 eq 8443
!
!--  The following vulnerability-specific access control entries
!--  (ACEs) can aid in identification of attacks
!
ipv6 access-list IPv6-tACL-Policy deny tcp any 2001:db8:1:60::/64 eq 8080
ipv6 access-list IPv6-tACL-Policy deny tcp any 2001:db8:1:60::/64 eq 8443
!
!--  Permit or deny all other Layer 3 and Layer 4 traffic in accordance
!--  with existing security policies and configurations
!
!--  Explicit deny for all other IP traffic
!
ipv6 access-list IPv6-tACL-Policy deny ip any any
!
!--  Apply tACLs to interfaces in the ingress direction
!
access-group tACL-Policy in interface outside
access-group IPv6-tACL-Policy in interface outside

Identification: Transit Access Control Lists

After the tACL has been applied to an interface, administrators can use the show access-list command to identify the number of IPv4 and IPv6 packets on TCP ports 8080 and 8443 that have been filtered. Administrators are advised to investigate filtered packets to determine whether they are attempts to exploit these vulnerabilities. Example output for show access-list tACL-Policy and show access-list IPv6-tACL-Policy follows:
firewall#show access-list tACL-Policy
access-list tACL-Policy; 5 elements; name hash: 0x3452703d
access-list tACL-Policy line 1 extended permit tcp host 192.168.100.1 
     192.168.60.0 255.255.255.0 eq 8080 (hitcnt=31)
access-list tACL-Policy line 2 extended permit tcp host 192.168.100.1 
     192.168.60.0 255.255.255.0 eq 8443 (hitcnt=61)
access-list tACL-Policy line 3 extended deny tcp any 192.168.60.0 
     255.255.255.0 eq 8080 (hitcnt=8)
access-list tACL-Policy line 4 extended deny tcp any 192.168.60.0 
     255.255.255.0 eq 8443 (hitcnt=14)
access-list tACL-Policy line 5 extended deny ip any any (hitcnt=8)
In the preceding example, access list tACL-Policy has dropped the following packets received from an untrusted host or network:
  • 8 packets on TCP port 8080 for ACE line 3
  • 14 packets on TCP port 8443 for ACE line 4
firewall#show access-list IPv6-tACL-Policy                 
ipv6 access-list IPv6-tACL-Policy; 5 elements; name hash: 0x566a4229
ipv6 access-list IPv6-tACL-Policy line 1 permit tcp host 2001:db8:1:100::1 
     2001:db8:1:60::/64 eq 8080 (hitcnt=59) 
ipv6 access-list IPv6-tACL-Policy line 2 permit tcp host 2001:db8:1:100::1 
     2001:db8:1:60::/64 eq 8443 (hitcnt=28) 
ipv6 access-list IPv6-tACL-Policy line 3 deny tcp any 
     2001:db8:1:60::/64 eq 8080 (hitcnt=40) 
ipv6 access-list IPv6-tACL-Policy line 4 deny tcp any 
     2001:db8:1:60::/64 eq 8443 (hitcnt=33) 
ipv6 access-list IPv6-tACL-Policy line 5 deny ip any any (hitcnt=27)
In the preceding example, access list IPv6-tACL-Policy has dropped the following packets received from an untrusted host or network:
  • 40 packets on TCP port 8080 for ACE line 3
  • 33 packets on TCP port 8443 for ACE line 4
In addition, syslog message 106023 can provide valuable information, which includes the source and destination IP address, the source and destination port numbers, and the IP protocol for the denied packet.

Identification: Firewall Access List Syslog Messages

Firewall syslog message 106023 will be generated for packets denied by an access control entry (ACE) that does not have the log keyword present. Additional information about this syslog message is in Cisco ASA 5500 Series System Log Message, 8.2 - 106023.

Information about configuring syslog for the Cisco ASA 5500 Series Adaptive Security Appliance is in Monitoring - Configuring Logging. Information about configuring syslog on the Cisco Catalyst 6500 Series ASA Services Module is in Configuring Logging. Information about configuring syslog on the FWSM for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is in Monitoring the Firewall Services Module.

In the following example, the show logging | grep regex command extracts syslog messages from the logging buffer on the firewall. These messages provide additional information about denied packets that could indicate potential attempts to exploit the vulnerabilities that are described in this document. It is possible to use different regular expressions with the grep keyword to search for specific data in the logged messages.

Additional information about regular expression syntax is in Creating a Regular Expression.
firewall#show logging | grep 106023
  Jul 17 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.18/4278 
         dst inside:192.168.60.191/8443 by access-group "tACL-Policy"
  Jul 17 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.200/4279 
         dst inside:192.168.60.33/8443 by access-group "tACL-Policy"
  Jul 17 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.99/4280 
         dst inside:192.168.60.240/8080 by access-group "tACL-Policy"
  Jul 17 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.100/4281 
         dst inside:192.168.60.115/8443 by access-group "tACL-Policy"
  Jul 17 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.88/4282 
         dst inside:192.168.60.38/8080 by access-group "tACL-Policy"
  Jul 17 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.175/4283 
         dst inside:192.168.60.250/8080 by access-group "tACL-Policy"
  Jul 17 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:2001:db8:2::2:172/4286
         dst inside:2001:db8:1:60::23/8443 by access-group "IPv6-tACL-Policy"
  Jul 17 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:2001:db8:d::a85e:172/4287
         dst inside:2001:db8:1:60::134/8080 by access-group "IPv6-tACL-Policy"
firewall#
In the preceding example, the messages logged for the tACL tACL-Policy and IPv6-tACL-Policy show packets for TCP ports 8080 and 8443 sent to the address block assigned to affected devices.

Additional information about syslog messages for Cisco ASA Series Adaptive Security Appliances is in Cisco ASA 5500 Series System Log Messages, 8.2. Additional information about syslog messages for Cisco Catalyst 6500 Series ASA Services Module is in the Analyzing Syslog Messages section of the Cisco ASASM CLI Configuration Guide. Additional information about syslog messages for the Cisco FWSM is in Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Logging System Log Messages.

For additional information about investigating incidents using syslog events, reference the Identifying Incidents Using Firewall and IOS Router Syslog Events Cisco Security Intelligence Operations white paper.

Additional Information

THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.

Cisco Security Procedures

Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on Cisco's worldwide website at http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html. This includes instructions for press inquiries regarding Cisco security notices. All Cisco security advisories are available at http://www.cisco.com/go/psirt.

Related Information

 
Alert History
 

Alert History

Initial Release


Product Sets
 
The security vulnerability applies to the following combinations of products.

Primary Products:
CiscoCisco Unified Communications Manager 7.1 Base, (3), (5), (5b) | 8.0 Base, (2c), (3) | 8.5 Base | 8.6 Base | 9.0 Base | 9.0(1) Base | 9.1 Base | 9.1(1) Base
CiscoCisco Unified Presence Server 6.0 Base, .1, .2, .3, .4, .5, .6, .7 | 7.0 Base, .1, .2, .3, .4, .5, .6, .7, .8 | 8.0 .1, .2 | 8.5 .1, .2, .3, .4, .5 | 9.5 Base

Associated Products:
CiscoCisco Unified Presence Server 8.6 Base, .4 | 9.0 Base




Alerts and bulletins on the Cisco Security Intelligence Operations Portal are highlighted by analysts in the Cisco Threat Operations Center and represent a subset of the comprehensive content that is available through Cisco Security IntelliShield Alert Manager Service. This customizable threat and vulnerability alert service provides security staff with access to timely, accurate, and credible information about threats and vulnerabilities that may affect their environment.


LEGAL DISCLAIMER
The urgency and severity ratings of this alert are not tailored to individual users; users may value alerts differently based upon their network configurations and circumstances. THE ALERT, AND INFORMATION CONTAINED THEREIN, ARE PROVIDED ON AN "AS IS" BASIS AND DO NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE ALERT, AND INFORMATION CONTAINED THEREIN, OR MATERIALS LINKED FROM THE ALERT, IS AT YOUR OWN RISK. INFORMATION IN THIS ALERT AND ANY RELATED COMMUNICATIONS IS BASED ON OUR KNOWLEDGE AT THE TIME OF PUBLICATION AND IS SUBJECT TO CHANGE WITHOUT NOTICE. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE ALERTS AT ANY TIME.
Powered by  IntelliShield