This is the Cisco PSIRT response to an issue that was disclosed by Mr.
Sebastian Muniz of Core Security Technologies at the EUSecWest security
conference on May 22, 2008.
No new vulnerability on the Cisco IOS software was disclosed during the
presentation. To the best of our knowledge, no exploit code has been made
publicly available, and Cisco has not received any customer reports of
Cisco has analyzed the available information and recommends following
industry best-practices to improve the security of all network devices.
Specific recommendations are available in the Additional Information section of
this Security Response.
Cisco PSIRT greatly appreciates the opportunity to work with
researchers on security vulnerabilities and welcomes the opportunity to review
and assist in product reports. We would like to thank Mr. Sebastian Muniz and
Core Security Technologies for working with us towards the goal of keeping
Cisco networks and the Internet, as a whole, secure.
The security of Cisco IOS devices consists of multiple factors,
including physical and logical access to the device, configuration of the
device, and the inherent security of the software being used. The security
configuration of a device, specifically in relation to device security, is
conveyed using documented best practices. The document entitled "Cisco Guide to
Harden Cisco IOS Devices" (available at
represents one collection of those best practices.
The integrity of the software used on Cisco IOS devices, in this case
Cisco IOS software, is also important to device security. Depending on
severity, security issues in Cisco IOS software are communicated to customers
using Security Advisories, Security Responses, or Cisco bug release notes.
Further details are documented in the Cisco Security Vulnerability Policy,
It is possible that an attacker could insert malicious code into a
Cisco IOS software image and load it onto a Cisco device that supports that
image. This attack scenario could occur on any device that uses a form of
software, given a proper set of circumstances. This Security Response will
describe best practices that network administrators can use to reduce the risk
that malicious code is installed on Cisco IOS devices. Additionally, this
response will offer some methods that administrators can use to mitigate the
risks of introducing malicious code into the network.
Security Best Practices
Cisco recommends that the following security best practices be
implemented to improve the security posture of the network. These practices are
particularly relevant to ensure that Cisco IOS devices only use authorized and
unaltered Cisco IOS software images.
Supply Chain Integrity
To minimize the risk associated with malicious code, it is important
that network administrators develop and consistently apply a secure methodology
for Cisco IOS software image management. This secure process must be used from
the time a Cisco IOS software image is downloaded from cisco.com until a Cisco
IOS device begins using it.
Although processes may vary based on the network and its security and
change management requirements, the following procedure represents an example
of best practices that may help minimize the possibility of malicious code
When downloading a Cisco IOS software image from www.cisco.com,
record the MD5 hash as presented by the Cisco IOS Upgrade Planner tool.
Once the image has been downloaded to an administrative workstation,
the MD5 hash of the local file should be verified against the hash presented by
the Cisco IOS Upgrade Planner.
Once the Cisco IOS software image file has been verified as authentic
and unaltered, copy it to write-once media or media that can be rendered as
read-only after the image has been written.
Verify the MD5 hash of the file written to the read-only media to
detect corruption during the copy process.
Remove the local file on the administrative workstation.
Relocate the read-only media to the file server that is used for
Cisco IOS software image distribution to Cisco IOS devices.
Transfer the Cisco IOS software image from the file server to the
Cisco IOS device using a secure protocol that provides both authentication and
Verify the MD5 hash of the Cisco IOS software image on the Cisco IOS
device using the procedures detailed in the 'Image File Information Using IOS
Upgrade Planner' section.
Modify the configuration of the Cisco IOS device to load the new
Cisco IOS software image upon startup.
Reload the Cisco IOS device to place the new software into
Implement Change Control
Change control is a mechanism through which changes being made to
network devices are requested, approved, implemented, and audited. In the
context of ensuring the authenticity of Cisco IOS software images used in the
network, change control is relevant because it helps greatly when determining
which changes have been authorized and which are unauthorized. Change control
is important to help ensure that only authorized and unaltered Cisco IOS
software is used on Cisco IOS devices in the network.
Harden the Software Distribution Server
The server that is used to distribute software to Cisco IOS devices in
the network is a critical component of network security. Several best practices
should be implemented to help ensure the authenticity and integrity of software
that is distributed from this server. These best practices include:
Application of well established operating system hardening procedures
that is specific to the operating system in use
Configuration of all appropriate logging and auditing capabilities,
including logging to write-once media
Placement of the software distribution server on a secure network
with restricted connectivity from all but the most trusted networks
The use of restrictive security controls to limit interactive access
(as an example, SSH) to only a subset of trusted network administrators
Utilize Up-to-Date Software
Cisco IOS software used in the network must be kept up-to-date so that
new security functionality can be leveraged and exposure to known
vulnerabilities disclosed through Cisco Security Advisories is minimal.
Cisco is continually evolving the security of Cisco IOS software images
through the implementation of new security functionality and the resolution of
bugs. For these reasons, it is imperative that network administrators maintain
their networks in a manner that includes using up-to-date software. Failure to
do so could expose vulnerabilities that may be used to gain unauthorized access
to a Cisco IOS device.
Leverage Authentication, Authorization, and Accounting
The comprehensive implementation of Authentication, Authorization, and
Accounting (AAA) is critical to ensuring the security of interactive access to
network devices. Furthermore, AAA, and specifically authorization and
accounting functions, should be used to limit the actions authenticated users
can perform in addition to providing an audit trail of individual user
For additional information on the implementation of AAA please see the
the section entitled "Using Authentication, Authorization and Accounting"
of the "Cisco Guide to Harden Cisco IOS Devices".
Limit Interactive Access to Devices
Once AAA has been implemented to control which users can log in to
particular network devices, access control should be implemented to limit from
which IP addresses users may perform management functions on a network device.
This access control includes multiple security features and solutions to limit
access to a device:
VTY access classes
Management Plane Protection (MPP)
Control Plane Policing (CoPP)
Control Plane Protection (CPPr)
Infrastructure Access Control Lists (iACL)
Simple Network Management Protocol (SNMP) access lists
For more information, please consult the following sections of the
"Cisco Guide to Harden Cisco IOS devices": "Securing Interactive Management
Sessions" (available at
and "Fortifying the Simple Network Management Protocol" (available at
Leverage Centralized and Comprehensive Logging
For network administrators to understand events taking place on a
network, a comprehensive logging structure using centralized log collection and
correlation must be implemented. Additionally, a standardized logging and time
configuration must be deployed on all network devices to facilitate accurate
logging. Furthermore, logging from the AAA functions in the network should be
included in the centralized logging implementation.
Once comprehensive logging is in place on a network, the collected data
must be used to monitor network activity for events that may indicate
unauthorized access to a network device, or unauthorized actions by legitimate
users. These types of events could represent the first step in undermining the
security on a Cisco IOS device. Because the items below may represent
unauthorized access or unauthorized actions, they should be monitored
The transmission of Cisco IOS software images to a Cisco IOS device
using the copy command or local SCP, TFTP, or FTP
The attempted execution of certain high risk EXEC commands. The
copy, gdb and
tclsh commands are some examples of commands that
should be monitored. This list is not exhaustive.
Modification of the boot environment in use on the network devices.
This specifically includes the boot and
config-register global configuration
Modification of the security configuration for a Cisco IOS device.
This may include the removal of VTY access classes or the logging configuration
or the addition of new administrative users.
Logging related to the insertion or removal of storage media, such as
SNMP-related logging of attempts to modify the Cisco IOS device
configuration or perform file management tasks.
The planned and unplanned reload of the Cisco IOS software due to a
software crash or the use of the reload command.
For more information, see the sections entitled "Centralize Log
Collection and Monitoring" (available at
and "Logging Best Practices" (available at
of the "Cisco Guide to Harden Cisco IOS Devices".
Cisco IOS Image File Verification
Network administrators can use one of several security features to
verify the authenticity and integrity of Cisco IOS software images in use on
their network devices. It is also possible to use a process that does not rely
on features in the Cisco IOS software itself.
The following sections contain information on Cisco IOS software
features and administrative processes that can be used to verify the
authenticity and integrity of a Cisco IOS software image.
Using the MD5 File Validation Feature
The MD5 File Validation feature, added in Cisco IOS Software Releases
12.2(4)T and 12.0(22)S, allows network administrators to calculate the MD5 hash
of a Cisco IOS software image file that is loaded on a device. It also allows
administrators to verify the calculated MD5 hash against that provided by the
user. Once the MD5 hash value of the installed Cisco IOS image is determined,
it can also be compared with the MD5 hash provided by Cisco to verify integrity
of the image file.
Note: The MD5 File Validation feature can only be used to check the
integrity of a Cisco IOS software image that is stored on a Cisco IOS device.
It cannot be used to check the integrity of an image running in memory.
MD5 hash calculation and verification using the MD5 File Validation
feature can be accomplished using the following command:
verify /md5 filesystem:filename [md5-hash]
Network administrators can use the verify
/md5 privileged EXEC command to verify the integrity of image
files that are stored on the Cisco IOS file system of a device. The following
shows how to use the verify /md5 command on a Cisco
router#verify /md5 disk0:c7301-jk9s-mz.124-10.bin
verify /md5 (disk0:c7301-jk9s-mz.124-10.bin) = ad9f9c902fa34b90de8365c3a5039a5b
Network administrators can also provide an MD5 hash to the
verify command. If provided, the
verify command will compare the calculated and
provided MD5 hashes as illustrated in the following example:
router#verify /md5 disk0:c7301-jk9s-mz.124-10.bin ad9f9c902fa34b90de8365c3a5039a5b
Verified (disk0:c7301-jk9s-mz.124-10.bin) = ad9f9c902fa34b90de8365c3a5039a5b
If the network administrator provides an MD5 hash that does not match
the hash calculated by the MD5 File Validation feature, an error message will
be displayed. This is illustrated in the following example:
router#verify /md5 disk0:c7301-jk9s-mz.124-10.bin 0c5be63c4e339707efb7881fde7d5324
%Error verifying disk0:c7301-jk9s-mz.124-10.bin
Computed signature = ad9f9c902fa34b90de8365c3a5039a5b
Submitted signature = 0c5be63c4e339707efb7881fde7d5324
In the preceding examples, the verify /md5
command calculates and displays the MD5 hash for the entire Cisco IOS image
file. This approach is in contrast to the updated
verify command present with the "Image Verification"
feature, which calculates the hash for the entire Cisco IOS image as well as
specific portions of the uncompressed Cisco IOS image file.
For additional information on how to use this feature, please consult
the document entitled "MD5 File Validation", which is available at
Using the Image Verification Feature
The Image Verification feature, added in Cisco IOS Software Releases
12.3(4)T, 12.0(26)S, and 12.2(18)S, builds on the MD5 File Validation
functionality to more easily allow network administrators to verify the
integrity of an image file that is loaded on the Cisco IOS file system of a
device. The purpose of the Image Verification feature is to ensure that
corruption of the Cisco IOS software image file has not occurred. The
corruption detected by this feature could have occurred at any time; for
example, during the download from Cisco.com or the installation process.
Note: The Image Verification feature does not check the integrity of the
image running in memory.
Cisco IOS software image file verification using this feature can be
accomplished using the following commands:
file verify auto
copy [/erase] [/verify | /noverify]
reload [warm] [/verify | /noverify]
[text | in time
[text] | at time [text] |
Note: Only the file verify auto global
configuration command and the verify privileged EXEC
command will be covered in this Security Response. For information on the
copy /verify and reload
/verify commands, please see the section entitled "Image
Verification" (available at
of the "Cisco IOS Security Configuration Guide" (available at
Configuring the file verify auto Command
Network administrators can use the file verify
auto global configuration command to enable verification of all
images that are either copied using the copy
privileged EXEC command or loaded using the reload
privileged EXEC command. These images are automatically verified for image file
The following example shows how to configure the file
verify auto Cisco IOS feature:
router(config)#file verify auto
In addition to file verify auto, both the
copy and the reload
commands have a /verify argument that enables the
Image Verification feature to check the integrity of the Cisco IOS image file.
This argument must be used each time an image is copied to or reloaded on a
Cisco IOS device if the global configuration command file verify
auto is not present.
Using the Image Verification Cisco IOS verify Command
Network administrators can also use the
verify privileged EXEC command, originally
introduced for the "MD5 File Validation" feature and updated by the "Image
Verification" feature, to verify the integrity of image files that are stored
locally on a device. The following example demonstrates how to use the updated
verify command on a Cisco IOS device:
Verifying file integrity of disk0:c7301-jk9s-mz.124-10.bin
Embedded Hash MD5 : 0C5BE63C4E339707EFB7881FDE7D5324
Computed Hash MD5 : 0C5BE63C4E339707EFB7881FDE7D5324
CCO Hash MD5 : AD9F9C902FA34B90DE8365C3A5039A5B
In the preceding output, three MD5 hash values are displayed by the
verify command. Here is an explanation of what each
one of those MD5 hash values means:
Embedded Hash: MD5 hash stored by Cisco in a section
of the Cisco IOS image file during the image build process; used to verify
section integrity for the Cisco IOS software image file. This MD5 hash value is
calculated for certain sections of the Cisco IOS image file.
Computed Hash: MD5 hash that the "Image
Verification" feature calculates for certain sections of the Cisco IOS software
image file when the verify command is executed. This value
should be the same as the Embedded Hash to verify section integrity of the
Cisco IOS image file. If this value is not equal to the Embedded Hash, the
Cisco IOS image file may be corrupted or intentionally altered.
CCO Hash: MD5 hash for the entire Cisco IOS image
file. This hash is computed by the verify command and is not stored in the
Cisco IOS software image.
For additional information please see the section entitled "Image
Verification" (available at
of the "Cisco IOS Security Configuration Guide" (available at
Downloading an Image File From a Cisco IOS Device
In certain circumstances, network administrators may consider moving an
existing Cisco IOS software image file from a Cisco IOS device to an
administrative workstation. Once on the administrative workstation, independent
tools can be used to calculate the MD5 hash of the file.
Two options are available for administrators to perform this task. One
option allows the administrator to use the Cisco IOS software in use on the
device to copy the stored Cisco IOS software image file to an administrative
workstation. If this process is being carried out for security reasons,
administrators are advised to use a secure protocol (such as SCP) to transfer
the file. However, it is technically possible to perform this process using
other protocols, including RCP, TFTP, FTP, HTTP or HTTPS. This process is
accomplished using the copy command as illustrated
in the following example:
router#copy flash:c7301-jk9s-mz.124-10.bin scp:c7301-jk9s-mz.124-10.bin
Address or name of remote host ? 10.1.1.1
Destination username [cisco]? user
Destination filename [c7301-jk9s-mz.124-10.bin]? <enter>
Password: <enter password>
! Sink: C0644 28905508 c7301-jk9s-mz.124-10.bin
28905508 bytes copied in 22.280 secs (1297375 bytes/sec)
A second and recommended option, one that provides an additional level
of security, is to restart a Cisco IOS device using a known-good version of
Cisco IOS software from a trusted location. Administrators can accomplish this
task using the boot system global configuration
command as illustrated in the following example:
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#boot system ftp c7301-jk9s-mz.124-10.bin 10.1.1.1
router#copy running-config startup-config
Destination filename [startup-config]? <enter>
Once the network device has been restarted with a known-good Cisco IOS
image, a network administrator can verify the locally stored image using the
verify command or by copying the Cisco IOS software
image to a remote file server for offline verification.
Offline Image File Verification
Once a file is stored on an administrative workstation, a network
administrator can verify the MD5 hash for that Cisco IOS image file using an
MD5 hashing utility. Such utilities include md5sum for the
Linux operating system, md5 for the BSD operating system, and
fsum, MD5summer, and WinMD5
for Microsoft Windows platforms. Additionally, the size of the Cisco IOS image
file can be obtained using the ls command on Linux
and BSD operating systems and the dir command on
Microsoft Windows platforms.
The following example demonstrates the MD5 calculation and file size
display for Linux-based systems:
$ md5sum c7301-jk9s-mz.124-10.bin
$ ls -l c7301-jk9s-mz.124-10.bin
-r--r--r-- 1 user user 28905508 May 16 15:17 c7301-jk9s-mz.124-10.bin
The following example illustrates this process for BSD-derived
$ md5 c7301-jk9s-mz.124-10.bin
MD5 (c7301-jk9s-mz.124-10.bin) = ad9f9c902fa34b90de8365c3a5039a5b
$ ls -l c7301-jk9s-mz.124-10.bin
-r--r--r-- 1 user user 28905508 May 16 21:36 c7301-jk9s-mz.124-10.bin
The following example shows the use of the fsum
utility and the dir command on a Windows
C:\>fsum -md5 c7301-jk9s-mz.124-10.bin
SlavaSoft Optimizing Checksum Utility - fsum 2.52.00337
Implemented using SlavaSoft QuickHash Library <www.slavasoft.com>
Copyright (C) SlavaSoft Inc. 1999-2007. All rights reserved.
; SlavaSoft Optimizing Checksum Utility - fsum 2.52.00337 <www.slavasoft.com>
; Generated on 05/20/08 at 00:01:13
Directory of C:\
05/20/2008 00:10 AM 28,905,508 c7301-jk9s-mz.124-10.bin
1 File(s) 28,905,508 bytes
0 Dir(s) 1,207,291,904 bytes free
Note: The use of the fsum utility is for illustrative
purposes only and should not be interpreted as an endorsement of the
Image File Information Using Cisco IOS Upgrade Planner
Once the MD5 hash and file size for a Cisco IOS software image has been
collected, network administrators can verify authenticity of the image using
information provided by the Cisco IOS Upgrade Planner tool during the download
process. The Cisco IOS Upgrade Planner tool requires a valid Cisco.com account
and provides details about each publicly available IOS image.
Network administrators must identify their Cisco IOS software release
(this can be done by using information obtained from output provided by the
show version command) and navigate through the Cisco
IOS Upgrade Planner tool to locate the image in use on the Cisco IOS device.
Network administrators should verify that the CCO Hash calculated by the Cisco
IOS verify command (part of the Cisco IOS "Image
Verification" feature), the MD5 hash calculated by the verify
/md5 command (part of the "MD5 File Validation" Cisco IOS
feature), or the MD5 hash calculated by a third-party utility matches the MD5
hash that is provided by the Cisco IOS Upgrade Planner tool.
If the MD5 hash value for the whole Cisco IOS image file does not match
the MD5 hash provided by Cisco, network administrators should download the
Cisco IOS image file from the Cisco IOS Upgrade Planner and use the file
verification methods described in this document to verify integrity of the
Cisco IOS image file.
The following is an example of the information provided by the Cisco
IOS Upgrade Planner tool during one of the steps required for downloading a
Cisco IOS software image file from www.cisco.com:
For those customers whose www.cisco.com account does not provide access to the Cisco IOS Upgrade Planner tool and hence cannot obtain the Cisco calculated, known MD5 hash value for a given Cisco IOS software image, or for those customers that would prefer to automate the process of validating MD5 hashes using their own tools, Cisco is making available a compressed file including the Cisco IOS software image name and known-good MD5 hash for all 12.0-based, 12.1-based, 12.2-based, 12.3-based, 12.4-based, 15.0-based, 15.1-based, 15.2-based, 15.3-based and 15.4-based Cisco IOS software releases. This file can be found at
Cisco Security Procedures
Complete information on reporting security vulnerabilities in Cisco
products, obtaining assistance with security incidents, and registering to
receive security information from Cisco, is available on Cisco's worldwide
This includes instructions for press inquiries regarding Cisco security
notices. All Cisco security advisories are available at